Display controller's power resources and bus
bandwidth voting is controlled by DPU device.
Remove DPU RSC (hardware block for DPU power
resource control) device support.
Signed-off-by: Rajesh Yadav <ryadav@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/msm/dpu-rsc.txt | 96 ----------------------
1 file changed, 96 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/msm/dpu-rsc.txt
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-rsc.txt b/Documentation/devicetree/bindings/display/msm/dpu-rsc.txt
deleted file mode 100644
index f5fbcda..0000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-rsc.txt
+++ /dev/null
@@ -1,96 +0,0 @@
-Qualcomm Technologies, Inc. DPU RSC
-
-Snapdragon Display Engine implements display rsc to driver
-display core to different modes for power saving
-
-Required properties
-- compatible: Must be "qcom,dpu-rsc"
-- reg: Offset and length of the register set for
- the device.
-- reg-names: Names to refer to register sets related
- to this device
-
-Optional properties:
-- clocks: List of phandles for clock device nodes
- needed by the device.
-- clock-names: List of clock names needed by the device.
-- vdd-supply: phandle for vdd regulator device node.
-- qcom,dpu-rsc-version: U32 property represents the rsc version. It helps to
- select correct sequence for dpu rsc based on version.
-- qcom,dpu-dram-channels: U32 property represents the number of channels in the
- Bus memory controller.
-- qcom,dpu-num-nrt-paths: U32 property represents the number of non-realtime
- paths in each Bus Scaling Usecase. This value depends on
- number of AXI ports that are dedicated to non-realtime VBIF
- for particular chipset.
- These paths must be defined after rt-paths in
- "qcom,msm-bus,vectors-KBps" vector request.
-
-Bus Scaling Subnodes:
-- qcom,dpu-data-bus: Property to provide Bus scaling for data bus access for
- dpu blocks.
-- qcom,dpu-llcc-bus: Property to provide Bus scaling for data bus access for
- mnoc to llcc.
-- qcom,dpu-ebi-bus: Property to provide Bus scaling for data bus access for
- llcc to ebi.
-
-Bus Scaling Data:
-- qcom,msm-bus,name: String property describing client name.
-- qcom,msm-bus,active-only: Boolean context flag for requests in active or
- dual (active & sleep) contex
-- qcom,msm-bus,num-cases: This is the number of Bus Scaling use cases
- defined in the vectors property.
-- qcom,msm-bus,num-paths: This represents the number of paths in each
- Bus Scaling Usecase.
-- qcom,msm-bus,vectors-KBps: * A series of 4 cell properties, with a format
- of (src, dst, ab, ib) which is defined at
- Documentation/devicetree/bindings/arm/msm/msm_bus.txt
- * Current values of src & dst are defined at
- include/linux/msm-bus-board.h
-Example:
- dpu_rscc {
- cell-index = <0>;
- compatible = "qcom,dpu-rsc";
- reg = <0xaf20000 0x1c44>,
- <0xaf30000 0x3fd4>;
- reg-names = "drv", "wrapper";
- clocks = <&clock_mmss clk_mdss_ahb_clk>,
- <&clock_mmss clk_mdss_axi_clk>;
- clock-names = "iface_clk", "bus_clk";
- vdd-supply = <&gdsc_mdss>;
-
- qcom,dpu-rsc-version = <1>;
- qcom,dpu-dram-channels = <2>;
- qcom,dpu-num-nrt-paths = <1>;
-
- qcom,dpu-data-bus {
- qcom,msm-bus,name = "dpu_rsc";
- qcom,msm-bus,active-only;
- qcom,msm-bus,num-cases = <3>;
- qcom,msm-bus,num-paths = <2>;
- qcom,msm-bus,vectors-KBps =
- <22 512 0 0>, <23 512 0 0>,
- <22 512 0 6400000>, <23 512 0 6400000>,
- <22 512 0 6400000>, <23 512 0 6400000>;
- };
- qcom,dpu-llcc-bus {
- qcom,msm-bus,name = "dpu_rsc_llcc";
- qcom,msm-bus,active-only;
- qcom,msm-bus,num-cases = <3>;
- qcom,msm-bus,num-paths = <1>;
- qcom,msm-bus,vectors-KBps =
- <20001 20513 0 0>,
- <20001 20513 0 6400000>,
- <20001 20513 0 6400000>;
- };
- qcom,dpu-ebi-bus {
- qcom,msm-bus,name = "dpu_rsc_ebi";
- qcom,msm-bus,active-only;
- qcom,msm-bus,num-cases = <3>;
- qcom,msm-bus,num-paths = <1>;
- qcom,msm-bus,vectors-KBps =
- <20000 20512 0 0>,
- <20000 20512 0 6400000>,
- <20000 20512 0 6400000>;
- };
- };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
