Hi Viresh, On 4/2/2018 8:37 PM, Sricharan R wrote: > Hi Viresh, > > On 4/2/2018 3:00 PM, Viresh Kumar wrote: >> +Sricharan, >> >> On 30-03-18, 00:26, Ilia Lin wrote: >>> In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996 >>> that have KRYO processors, the CPU ferequencies subset and voltage value >>> of each OPP varies based on the silicon variant in use. >>> Qualcomm Technologies, Inc. Process Voltage Scaling Tables >>> defines the voltage and frequency value based on the msm-id in SMEM >>> and speedbin blown in the efuse combination. >>> The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC >>> to provide the OPP framework with required information. >>> This is used to determine the voltage and frequency value for each OPP of >>> operating-points-v2 table when it is parsed by the OPP framework. >>> >>> This change adds documentation. >>> >>> Change-Id: I1953f652a48249fb516d175f0e965a9510cd4209 >>> Signed-off-by: Ilia Lin <ilialin@xxxxxxxxxxxxxx> >>> --- >>> .../devicetree/bindings/cpufreq/kryo-cpufreq.txt | 693 +++++++++++++++++++++ >>> 1 file changed, 693 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt >>> >>> diff --git a/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt >> >> This should really go in opp directory. >> >>> new file mode 100644 >>> index 0000000..20cef9d >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/cpufreq/kryo-cpufreq.txt >>> @@ -0,0 +1,693 @@ >>> +Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings >>> +=================================== >>> + >>> +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996 >>> +that have KRYO processors, the CPU ferequencies subset and voltage value >>> +of each OPP varies based on the silicon variant in use. >>> +Qualcomm Technologies, Inc. Process Voltage Scaling Tables >>> +defines the voltage and frequency value based on the msm-id in SMEM >>> +and speedbin blown in the efuse combination. >>> +The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC >>> +to provide the OPP framework with required information (existing HW bitmap). >>> +This is used to determine the voltage and frequency value for each OPP of >>> +operating-points-v2 table when it is parsed by the OPP framework. >>> + >>> +Required properties: >>> +-------------------- >>> +In 'cpus' nodes: >>> +- operating-points-v2: Phandle to the operating-points-v2 table to use. >>> + >>> +In 'operating-points-v2' table: >>> +- compatible: Should be >>> + - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996. >>> +- nvmem-cells: A phandle pointing to a nvmem-cells node representing the >>> + efuse registers that has information about the >>> + speedbin that is used to select the right frequency/voltage >>> + value pair. >>> + Please refer the for nvmem-cells >>> + bindings Documentation/devicetree/bindings/nvmem/nvmem.txt >>> + and also examples below. >> >> Sricharan is also working on adding these, just make sure you guys do the same >> thing.. >> Right, i was adding a similar one for krait cores [1]. There is code common in the init sequence across both (little). Do you suggest to make them common ? Regards, Sricharan [1] https://patchwork.kernel.org/patch/10261873/ -- "QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
