Hi Bjorn,
On 3/27/2018 11:19 PM, Bjorn Andersson wrote:
> On Fri 23 Mar 03:18 PDT 2018, Sricharan R wrote:
>
>> Reviewed-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
>> 1 file changed, 103 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
>> index 6a838b5..dbca7ec 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
>> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
>> @@ -21,6 +21,7 @@
>>
>> aliases {
>> serial0 = &blsp1_uart5;
>> + serial1 = &serial_blsp2;
>> };
>>
>> chosen {
>> @@ -41,6 +42,47 @@
>> bias-disable;
>> };
>> };
>> +
>> + i2c_0_pins: i2c_0_pinmux {
>> + mux {
>> + pins = "gpio42", "gpio43";
>> + function = "blsp1_i2c";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + spi_0_pins: spi_0_pins {
>> + mux {
>> + pins = "gpio38", "gpio39", "gpio40", "gpio41";
>> + function = "blsp0_spi";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + hsuart_pins: hsuart_pins {
>> + mux {
>> + pins = "gpio46", "gpio47", "gpio48", "gpio49";
>> + function = "blsp2_uart";
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + };
>> +
>> + qpic_pins: qpic_pins {
>> + mux {
>> + pins = "gpio1", "gpio3", "gpio4",
>> + "gpio5", "gpio6", "gpio7",
>> + "gpio8", "gpio10", "gpio11",
>> + "gpio12", "gpio13", "gpio14",
>> + "gpio15", "gpio16", "gpio17";
>> + function = "qpic";
>
> I would prefer that you move the pinmux part to the same dtsi that
> defines the nand and add the board specific pinconf (electrical
> properties) here. That way we limit the repetition between the board
> files.
>
sure. will do.
>> + drive-strength = <8>;
>> + bias-disable;
>> + };
>> + };
>> +
>> };
>>
>
> Other than that,
>
> Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
>
Thanks. Again, thanks for your time and all the reviews.
Regards,
Sricharan
--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
