Re: [PATCH v4 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu 29 Mar 14:26 PDT 2018, Ilia Lin wrote:

> diff --git a/drivers/soc/qcom/kryo-l2-accessors.c b/drivers/soc/qcom/kryo-l2-accessors.c
> new file mode 100644
> index 0000000..b0356c2
> --- /dev/null
> +++ b/drivers/soc/qcom/kryo-l2-accessors.c
> @@ -0,0 +1,66 @@
> +/*
> + * Copyright (c) 2014-2015, 2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */

The copyright header in the C file should be:

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2014-2015, 2018, The Linux Foundation. All rights reserved.
 */

> +
> +#include <linux/spinlock.h>
> +#include <asm/sysreg.h>
> +#include <soc/qcom/kryo-l2-accessors.h>
> +
> +#define L2CPUSRSELR_EL1         sys_reg(3, 3, 15, 0, 6)
> +#define L2CPUSRDR_EL1           sys_reg(3, 3, 15, 0, 7)
> +
> +static DEFINE_RAW_SPINLOCK(l2_access_lock);
> +
> +/**
> + * set_l2_indirect_reg: write value to an L2 register

* set_l2_indirect_reg() - write value to an L2 register

> + * @reg: Address of L2 register.
> + * @value: Value to be written to register.
> + *
> + * Use architecturally required barriers for ordering between system register
> + * accesses, and system registers with respect to device memory
> + */
> +void set_l2_indirect_reg(u64 reg, u64 val)

As these are now kernel-global functions I recommend that you give them
a slightly more specific name; e.g. kryo_l2_set_indirect_reg() and
kryo_l2_get_indirect_reg().

[..]
> diff --git a/include/soc/qcom/kryo-l2-accessors.h b/include/soc/qcom/kryo-l2-accessors.h
> new file mode 100644
> index 0000000..3c796cf
> --- /dev/null
> +++ b/include/soc/qcom/kryo-l2-accessors.h
> @@ -0,0 +1,20 @@
> +/*
> + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */

And in the header file it should be:

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (c) 2014-2015, 2018, The Linux Foundation. All rights reserved.
 */

> +
> +#ifndef __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H
> +#define __SOC_ARCH_QCOM_KRYO_L2_ACCESSORS_H
> +
> +void set_l2_indirect_reg(u64 reg_addr, u64 val);
> +u64 get_l2_indirect_reg(u64 reg_addr);

Rename "reg_addr" to "reg" to match the implementation.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux