From: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Add the qup uart node and geni se instance needed to
support the serial console on the MTP.
Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 41 +++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 39 +++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 979ab49..17b2fb0 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -12,4 +12,45 @@
/ {
model = "Qualcomm Technologies, Inc. SDM845 MTP";
compatible = "qcom,sdm845-mtp";
+
+ aliases {
+ serial0 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&soc {
+ geniqup@ac0000 {
+ status = "okay";
+
+ serial@a84000 {
+ status = "okay";
+ };
+ };
+
+ pinctrl@3400000 {
+ qup-uart2-default {
+ pinconf_tx {
+ pins = "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf_rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ qup-uart2-sleep {
+ pinconf {
+ pins = "gpio4", "gpio5";
+ bias-pull-down;
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 32f8561..71801b9 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -6,6 +6,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-sdm845.h>
/ {
interrupt-parent = <&intc>;
@@ -194,6 +195,20 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ qup_uart2_default: qup-uart2-default {
+ pinmux {
+ function = "qup9";
+ pins = "gpio4", "gpio5";
+ };
+ };
+
+ qup_uart2_sleep: qup-uart2-sleep {
+ pinmux {
+ function = "gpio";
+ pins = "gpio4", "gpio5";
+ };
+ };
};
timer@17c90000 {
@@ -272,5 +287,29 @@
#interrupt-cells = <4>;
cell-index = <0>;
};
+
+ geniqup@ac0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0xac0000 0x6000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ uart2: serial@a84000 {
+ compatible = "qcom,geni-debug-uart";
+ reg = <0xa84000 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qup_uart2_default>;
+ pinctrl-1 = <&qup_uart2_sleep>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
};
};
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
