Hi Taniya,
On Wed, Mar 28, 2018 at 11:19 PM Taniya Das <tdas@xxxxxxxxxxxxxx> wrote:
> From: Amit Nischal <anischal@xxxxxxxxxxxxxx>
> Add the RPMh clock driver to control the RPMh managed clock resources on
> some of the Qualcomm Technologies, Inc. SoCs.
> Signed-off-by: David Collins <collinsd@xxxxxxxxxxxxxx>
> Signed-off-by: Amit Nischal <anischal@xxxxxxxxxxxxxx>
> Signed-off-by: Taniya Das <tdas@xxxxxxxxxxxxxx>
> ---
> drivers/clk/qcom/Kconfig | 9 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/clk-rpmh.c | 397
++++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/qcom,rpmh.h | 25 +++
> 4 files changed, 432 insertions(+)
> create mode 100644 drivers/clk/qcom/clk-rpmh.c
> create mode 100644 include/dt-bindings/clock/qcom,rpmh.h
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
...
> diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
> new file mode 100644
> index 0000000..536d102
> --- /dev/null
> +++ b/drivers/clk/qcom/clk-rpmh.c
> @@ -0,0 +1,397 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#define pr_fmt(fmt) "%s: " fmt, __func__
Stanimir recently commented on a different patch asking for using dev_*
instead of this. Seems like an applicable comment here, too.
> +
> +#include <linux/kernel.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/regmap.h>
> +#include <soc/qcom/cmd-db.h>
> +#include <soc/qcom/rpmh.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
Alphabetize includes?
> +
> +#include "common.h"
> +#include "clk-regmap.h"
> +
> +#define CLK_RPMH_ARC_EN_OFFSET 0
> +#define CLK_RPMH_VRM_EN_OFFSET 4
> +#define CLK_RPMH_VRM_OFF_VAL 0
> +#define CLK_RPMH_VRM_ON_VAL 1
> +#define CLK_RPMH_APPS_RSC_AO_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
> + BIT(RPMH_ACTIVE_ONLY_STATE))
> +#define CLK_RPMH_APPS_RSC_STATE_MASK (BIT(RPMH_WAKE_ONLY_STATE) | \
> + BIT(RPMH_ACTIVE_ONLY_STATE) | \
> + BIT(RPMH_SLEEP_STATE))
> +struct clk_rpmh {
> + const char *res_name;
> + u32 res_addr;
> + u32 res_en_offset;
> + u32 res_on_val;
> + u32 res_off_val;
> + u32 state;
> + u32 aggr_state;
> + u32 last_sent_aggr_state;
> + u32 valid_state_mask;
> + struct rpmh_client *rpmh_client;
> + unsigned long rate;
> + struct clk_rpmh *peer;
> + struct clk_hw hw;
I believe this member should go at the beginning of the structure. At least
that's what everyone else seems to do, and that's what the clk.txt
documentation seems to ask for.
> +};
> +
> +struct rpmh_cc {
> + struct clk_onecell_data data;
> + struct clk *clks[];
> +};
> +
> +struct clk_rpmh_desc {
> + struct clk_hw **clks;
> + size_t num_clks;
> +};
> +
> +static DEFINE_MUTEX(rpmh_clk_lock);
> +
> +#define __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name, \
> + _res_en_offset, _res_on, _res_off, _rate, \
> + _state_mask, _state_on_mask)
\
> + static struct clk_rpmh _platform##_##_name_active;
\
> + static struct clk_rpmh _platform##_##_name = {
\
> + .res_name = _res_name,
\
> + .res_en_offset = _res_en_offset,
\
> + .res_on_val = _res_on,
\
> + .res_off_val = _res_off,
\
> + .rate = _rate,
\
> + .peer = &_platform##_##_name_active,
\
> + .valid_state_mask = _state_mask,
\
> + .hw.init = &(struct clk_init_data){
\
> + .ops = &clk_rpmh_ops,
\
> + .name = #_name,
\
> + },
\
> + };
\
> + static struct clk_rpmh _platform##_##_name_active = {
\
> + .res_name = _res_name,
\
> + .res_en_offset = _res_en_offset,
\
> + .res_on_val = _res_on,
\
> + .res_off_val = _res_off,
\
> + .rate = _rate,
\
> + .peer = &_platform##_##_name,
\
> + .valid_state_mask = _state_on_mask,
\
> + .hw.init = &(struct clk_init_data){
\
> + .ops = &clk_rpmh_ops,
\
> + .name = #_name_active,
\
> + },
\
> + }
> +
> +#define DEFINE_CLK_RPMH_ARC(_platform, _name, _name_active, _res_name, \
> + _res_on, _res_off, _rate, _state_mask, \
> + _state_on_mask) \
> + __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name, \
> + CLK_RPMH_ARC_EN_OFFSET, _res_on, _res_off, \
> + _rate, _state_mask, _state_on_mask)
> +
> +#define DEFINE_CLK_RPMH_VRM(_platform, _name, _name_active, _res_name, \
> + _rate, _state_mask, _state_on_mask) \
> + __DEFINE_CLK_RPMH(_platform, _name, _name_active, _res_name, \
> + CLK_RPMH_VRM_EN_OFFSET, CLK_RPMH_VRM_ON_VAL, \
> + CLK_RPMH_VRM_OFF_VAL, _rate, _state_mask, \
> + _state_on_mask)
> +
> +static inline struct clk_rpmh *to_clk_rpmh(struct clk_hw *_hw)
> +{
> + return container_of(_hw, struct clk_rpmh, hw);
> +}
> +
> +static inline bool has_state_changed(struct clk_rpmh *c, u32 state)
> +{
> + return ((c->last_sent_aggr_state & BIT(state))
> + != (c->aggr_state & BIT(state)));
> +}
> +
> +static int clk_rpmh_send_aggregate_command(struct clk_rpmh *c)
> +{
> + struct tcs_cmd cmd = { 0 };
> + int ret = 0;
> +
> + cmd.addr = c->res_addr + c->res_en_offset;
> +
> + if (has_state_changed(c, RPMH_SLEEP_STATE)) {
> + cmd.data = (c->aggr_state >> RPMH_SLEEP_STATE) & 1
> + ? c->res_on_val : c->res_off_val;
I found it quite confusing that you're shifting in the opposite direction
than in has_state_changed. How about this:
cmd.data = (c->aggr_state & BIT(RPMH_SLEEP_STATE)) ? c->res_on_val :
c->res_off_val;
> + ret = rpmh_write_async(c->rpmh_client, RPMH_SLEEP_STATE,
> + &cmd, 1);
> + if (ret) {
> + pr_err("rpmh_write_async(%s, state=%d) failed
(%d)\n",
> + c->res_name, RPMH_SLEEP_STATE, ret);
> + return ret;
> + }
> + }
> +
> + if (has_state_changed(c, RPMH_WAKE_ONLY_STATE)) {
> + cmd.data = (c->aggr_state >> RPMH_WAKE_ONLY_STATE) & 1
> + ? c->res_on_val : c->res_off_val;
> + ret = rpmh_write_async(c->rpmh_client,
> + RPMH_WAKE_ONLY_STATE, &cmd, 1);
> + if (ret) {
> + pr_err("rpmh_write_async(%s, state=%d) failed
(%d)\n",
> + c->res_name, RPMH_WAKE_ONLY_STATE, ret);
> + return ret;
> + }
> + }
> +
> + if (has_state_changed(c, RPMH_ACTIVE_ONLY_STATE)) {
> + cmd.data = (c->aggr_state >> RPMH_ACTIVE_ONLY_STATE) & 1
> + ? c->res_on_val : c->res_off_val;
> + ret = rpmh_write(c->rpmh_client, RPMH_ACTIVE_ONLY_STATE,
> + &cmd, 1);
> + if (ret) {
> + pr_err("rpmh_write(%s, state=%d) failed (%d)\n",
> + c->res_name, RPMH_ACTIVE_ONLY_STATE, ret);
> + return ret;
> + }
> + }
> +
> + c->last_sent_aggr_state = c->aggr_state;
> + c->peer->last_sent_aggr_state = c->last_sent_aggr_state;
> +
> + return 0;
> +}
> +
> +static void clk_rpmh_aggregate_state(struct clk_rpmh *c, bool enable)
> +{
> + /* Update state and aggregate state values based on enable value.
*/
> + c->state = enable ? c->valid_state_mask : 0;
> + c->aggr_state = c->state | c->peer->state;
> + c->peer->aggr_state = c->aggr_state;
> +}
> +
> +static int clk_rpmh_prepare(struct clk_hw *hw)
> +{
> + struct clk_rpmh *c = to_clk_rpmh(hw);
> + int ret = 0;
> +
> + mutex_lock(&rpmh_clk_lock);
> +
> + if (c->state)
> + goto out;
> +
> + clk_rpmh_aggregate_state(c, true);
> +
> + ret = clk_rpmh_send_aggregate_command(c);
> +
> + if (ret)
> + c->state = 0;
> +
> +out:
> + mutex_unlock(&rpmh_clk_lock);
> + return ret;
> +};
> +
> +static void clk_rpmh_unprepare(struct clk_hw *hw)
> +{
> + struct clk_rpmh *c = to_clk_rpmh(hw);
> + int ret = 0;
> +
> + mutex_lock(&rpmh_clk_lock);
> +
> + if (!c->state)
> + goto out;
> +
> + clk_rpmh_aggregate_state(c, false);
> +
> + ret = clk_rpmh_send_aggregate_command(c);
> +
> + if (ret) {
> + c->state = c->valid_state_mask;
> + WARN(1, "clk: %s failed to disable\n", c->res_name);
> + }
> +
> +out:
> + mutex_unlock(&rpmh_clk_lock);
> + return;
> +};
The guts of these two functions (clk_rpmh_{un,}prepare) look like they
would collapse pretty well into a single helper function that takes an
extra enable parameter. The if would change to !!c->state == enable,
clk_rpmh_aggregate_state would take the enable parameter, and the failure
case could restore a previously saved value. And you could just ditch the
WARN entirely (probably should do that anyway). Not critical though, up to
you.
...
> +
> +static int clk_rpmh_probe(struct platform_device *pdev)
> +{
> + struct clk **clks;
> + struct clk *clk;
> + struct rpmh_cc *rcc;
> + struct clk_onecell_data *data;
> + int ret;
> + size_t num_clks, i;
> + struct clk_hw **hw_clks;
> + struct clk_rpmh *rpmh_clk;
> + const struct clk_rpmh_desc *desc;
> + struct property *prop;
Remove this unused variable. It generates a warning (or an error for some
of us).
...
> diff --git a/include/dt-bindings/clock/qcom,rpmh.h
b/include/dt-bindings/clock/qcom,rpmh.h
> new file mode 100644
> index 0000000..34fbf3c
> --- /dev/null
> +++ b/include/dt-bindings/clock/qcom,rpmh.h
> @@ -0,0 +1,25 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_MSM_RPMH_H
> +#define _DT_BINDINGS_CLK_MSM_RPMH_H
Maybe _DT_BINDINGS_CLK_QCOM_RPMH_H instead?
-Evan
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
