Re: [PATCH v3 3/3] pinctrl: qcom: Don't allow protected pins to be requested

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Andy Shevchenko (2018-03-23 04:36:04)
> On Thu, 2018-03-22 at 19:16 -0500, Timur Tabi wrote:
> > On 03/21/2018 11:58 AM, Stephen Boyd wrote:
> > > +static int msm_gpio_init_valid_mask(struct gpio_chip *chip,
> > > +                               struct msm_pinctrl *pctrl)
> > > +{
> > > +   int ret;
> > > +   unsigned int len, i;
> > > +   unsigned int max_gpios = pctrl->soc->ngpios;
> > > +
> > > +   /* The number of GPIOs in the ACPI tables */
> > > +   ret = device_property_read_u16_array(pctrl->dev, "gpios",
> > > NULL, 0);
> > > +   if (ret > 0 && ret < max_gpios) {
> > 
> > This needs to be ret <= max_gpios, otherwise it will fail if every
> > GPIO 
> > is available.
> > 
> > And it should print an error message and return an error code if ret
> > > 
> > max_gpios.
> 
> Perhaps makes sense to do the opposite condition
> 
> if (ret < 0 || ret > max_gpios) {
>  ... error handling ...
> }
> 

Indeed. I already rewrote it like this two days ago:

static int msm_gpio_init_valid_mask(struct gpio_chip *chip,
                                   struct msm_pinctrl *pctrl)
{
       int ret;
       unsigned int len, i;
       unsigned int max_gpios = pctrl->soc->ngpios;
       u16 *tmp;

       /* The number of GPIOs in the ACPI tables */
       len = ret = device_property_read_u16_array(pctrl->dev, "gpios",
ULL, 0);
       if (ret < 0)
               return 0;

       if (ret > max_gpios)
               return -EINVAL;

       tmp = kmalloc_array(len, sizeof(*tmp), GFP_KERNEL);
       if (!tmp)
               return -ENOMEM;

       ret = device_property_read_u16_array(pctrl->dev, "gpios", tmp,
en);
       if (ret < 0) {
               dev_err(pctrl->dev, "could not read list of GPIOs\n");
               goto out;
       }

       bitmap_zero(chip->valid_mask, max_gpios);
       for (i = 0; i < len; i++)
               set_bit(tmp[i], chip->valid_mask);

out:
       kfree(tmp);
       return ret;
}

I'll send the updated patches now.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux