On Tue, Mar 20, 2018 at 10:00:49AM -0500, Sinan Kaya wrote:
> On 3/20/2018 9:48 AM, Jason Gunthorpe wrote:
> > On Mon, Mar 19, 2018 at 10:47:43PM -0400, Sinan Kaya wrote:
> >> Code includes wmb() followed by writel(). writel() already has a barrier on
> >> some architectures like arm64.
> >>
> >> This ends up CPU observing two barriers back to back before executing the
> >> register write.
> >>
> >> Since code already has an explicit barrier call, changing writel() to
> >> writel_relaxed().
> >>
> >> Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
> >> drivers/infiniband/hw/bnxt_re/qplib_rcfw.c | 8 ++++----
> >> 1 file changed, 4 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
> >> index 8329ec6..4a6b981 100644
> >> +++ b/drivers/infiniband/hw/bnxt_re/qplib_rcfw.c
> >> @@ -181,10 +181,10 @@ static int __send_message(struct bnxt_qplib_rcfw *rcfw, struct cmdq_base *req,
> >>
> >> /* ring CMDQ DB */
> >> wmb();
> >> - writel(cmdq_prod, rcfw->cmdq_bar_reg_iomem +
> >> - rcfw->cmdq_bar_reg_prod_off);
> >> - writel(RCFW_CMDQ_TRIG_VAL, rcfw->cmdq_bar_reg_iomem +
> >> - rcfw->cmdq_bar_reg_trig_off);
> >> + writel_relaxed(cmdq_prod, rcfw->cmdq_bar_reg_iomem +
> >> + rcfw->cmdq_bar_reg_prod_off);
> >> + writel_relaxed(RCFW_CMDQ_TRIG_VAL, rcfw->cmdq_bar_reg_iomem +
> >> + rcfw->cmdq_bar_reg_trig_off);
> >
> > Woah, this may not be safe..
> >
> > The definition of writel_relaxed() is that it is fully unordered, so
> > the above two writes may change order now. Broadcom guys would have to
> > ack if that it is OK or not for their hardware.
> >
> > In general this is not an OK approach for a mechanical
> > conversion.. Only the first writel can be convereted.
> >
> > You need to check all your patches to make sure there are no
> > subsequent writel's in the places touched.
>
> I paid special attention to this one and went to check the barriers
> document. According to the document, writes (whether it is relaxed or not)
> are always observed by the HW inorder with respect to each other.
Oh interesting, that document got revised to make writel_relaxed less
relaxed a few years ago, didn't know that. Thanks.
However, this is still not OK, the full code is:
/* ring CMDQ DB */
wmb();
writel(cmdq_prod, rcfw->cmdq_bar_reg_iomem +
rcfw->cmdq_bar_reg_prod_off);
writel(RCFW_CMDQ_TRIG_VAL, rcfw->cmdq_bar_reg_iomem +
rcfw->cmdq_bar_reg_trig_off);
done:
spin_unlock_irqrestore(&cmdq->lock, flags);
And the definition of _relaxed allows the writes to order outside the
spinlock region, which is very likely to be wrong in this driver.
I'm not sure adding a mmiowb() just to use a writel_relaxed is any
sort of win though?
Jason
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
