> -----Original Message-----
> From: Stephen Boyd <sboyd@xxxxxxxxxx>
> Sent: Monday, March 19, 2018 18:49
> To: Ilia Lin <ilialin@xxxxxxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-arm-msm@xxxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx;
> sboyd@xxxxxxxxxxxxxx
> Cc: mark.rutland@xxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> rnayak@xxxxxxxxxxxxxx; robh@xxxxxxxxxx; will.deacon@xxxxxxx;
> amit.kucheria@xxxxxxxxxx; tfinkel@xxxxxxxxxxxxxx; ilialin@xxxxxxxxxxxxxx;
> nicolas.dechesne@xxxxxxxxxx; celster@xxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 09/10] DT: QCOM: Add cpufreq-dt to msm8996
>
> Quoting Ilia Lin (2018-02-14 05:59:51)
> > diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> > b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> > index 492a011..930f68b 100644
> > --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> > @@ -1,5 +1,5 @@
> > /*
> > - * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
> > + * Copyright (c) 2014-2016,2018 The Linux Foundation. All rights reserved.
> > *
> > * This program is free software; you can redistribute it and/or modify
> > * it under the terms of the GNU General Public License version 2 and
>
> Why?
The file was changed again in 2018. I'm reflecting this in the file dates.
>
> > diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > index 4b2afcc..0359197 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> > @@ -144,6 +152,182 @@
> > };
> > };
> >
> > + cluster0_opp: opp_table0 {
> > + compatible = "operating-points-v2";
> > + opp-shared;
> > +
> > + opp@307200000 {
> > + opp-hz = /bits/ 64 < 307200000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@422400000 {
> > + opp-hz = /bits/ 64 < 422400000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@480000000 {
>
> It looks like opp-480000000 now instead of opp@<freq>.
Will be changed in the next spin.
>
> > + opp-hz = /bits/ 64 < 480000000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@556800000 {
> > + opp-hz = /bits/ 64 < 556800000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@652800000 {
> > + opp-hz = /bits/ 64 < 652800000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@729600000 {
> > + opp-hz = /bits/ 64 < 729600000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@844800000 {
> > + opp-hz = /bits/ 64 < 844800000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@960000000 {
> > + opp-hz = /bits/ 64 < 960000000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1036800000 {
> > + opp-hz = /bits/ 64 < 1036800000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1113600000 {
> > + opp-hz = /bits/ 64 < 1113600000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1190400000 {
> > + opp-hz = /bits/ 64 < 1190400000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1228800000 {
> > + opp-hz = /bits/ 64 < 1228800000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1324800000 {
> > + opp-hz = /bits/ 64 < 1324800000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1401600000 {
> > + opp-hz = /bits/ 64 < 1401600000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1478400000 {
> > + opp-hz = /bits/ 64 < 1478400000 >;
> > + clock-latency-ns = <200000>;
> > + };
> > + opp@1593600000 {
> [...]
> > +
> > + };
> > thermal-zones {
> > cpu-thermal0 {
> > polling-delay-passive = <250>; @@ -403,7
> > +587,7 @@
> > };
> >
> > kryocc: clock-controller@6400000 {
> > - compatible = "qcom,apcc-msm8996";
> > + compatible = "qcom-msm8996-apcc";
>
> Bad change?
This was required by Rob Herring.
>
> > reg = <0x6400000 0x90000>;
> > #clock-cells = <1>;
> > };
> > diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c
> > b/drivers/cpufreq/cpufreq-dt-platdev.c
> > index 3b585e4..b6cd0ae 100644
> > --- a/drivers/cpufreq/cpufreq-dt-platdev.c
> > +++ b/drivers/cpufreq/cpufreq-dt-platdev.c
> > @@ -95,6 +95,9 @@
> > { .compatible = "xlnx,zynq-7000", },
> > { .compatible = "xlnx,zynqmp", },
> >
> > + { .compatible = "qcom,msm8996", },
> > + { .compatible = "qcom,apq8096", },
> > +
>
> Why can't we base it on the kryocc node being present?
This could be good idea, if I would writing a platform specific cpufreq driver, which may be a future option.
> Or even populate
> the cpufreq-dt from the kryocc driver?
There is a problem that during the clock probe the OPP table still doesn't exist.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
