Document the device tree bindings for the Adreno GMU device
available on Adreno a6xx targets.
Signed-off-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/msm/gmu.txt | 54 ++++++++++++++++++++++
.../devicetree/bindings/display/msm/gpu.txt | 10 +++-
2 files changed, 62 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/msm/gmu.txt
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt
new file mode 100644
index 000000000000..f65bb49fff36
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gmu.txt
@@ -0,0 +1,54 @@
+Qualcomm adreno/snapdragon GMU (Graphics management unit)
+
+The GMU is a programmable power controller for the GPU. the CPU controls the
+GMU which in turn handles power controls for the GPU.
+
+Required properties:
+- compatible:
+ * "qcom,adreno-gmu"
+- reg: Physical base address and length of the GMU registers.
+- reg-names: Matching names for the register regions
+ * "gmu"
+ * "gmu_pdc"
+- interrupts: The interrupt signals from the GMU.
+- interrupt-names: Matching names for the interrupts
+ * "hfi"
+ * "gmu"
+- clocks: phandles to the device clocks
+- clock-names: Matching names for the clocks
+ * "gmu"
+ * "cxo"
+ * "axi"
+ * "mnoc"
+- power-domains: should be <&clock_gpucc GPU_CX_GDSC>
+- iommus: phandle to the adreno iommu
+- operating-points-v2: phandle to the OPP operating points
+
+Example:
+
+/ {
+ ...
+
+ gmu: gmu@506a000 {
+ compatible="qcom,adreno-gmu";
+
+ reg = <0x506a000 0x30000>,
+ <0xb200000 0x300000>;
+ reg-names = "gmu", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&clock_gpucc GPU_CC_CX_GMU_CLK>,
+ <&clock_gpucc GPU_CC_CXO_CLK>,
+ <&clock_gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&clock_gcc GCC_GPU_MEMNOC_GFX_CLK>;
+ clock-names = "gmu", "cxo", "axi", "memnoc";
+
+ power-domains = <&clock_gpucc GPU_CX_GDSC>;
+ iommus = <&adreno_smmu 5>;
+
+ i operating-points-v2 = <&gmu_opp_table>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 43fac0fe09bb..544a7510166b 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -8,12 +8,18 @@ Required properties:
with the chip-id.
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the gpu.
-- clocks: device clocks
+
+Optional properties.
+- clocks: device clocks. Required for a3xx, a4xx and a5xx targets. a6xx and
+ newer with a GMU attached do not have direct clock control from the CPU and
+ do not need to provide clock properties.
See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
+- clock-names: the following clocks can be provided:
* "core"
* "iface"
* "mem_iface"
+- qcom,gmu: For a6xx and newer targets a phandle to the GMU device that will
+ control the power for the GPU
Example:
--
2.16.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
