SDM845 has two USB instances each with QUSB2 and QMP PHYs. One of the QMP PHY is USB-DP (DisplayPort) combo PHY where as other one is single lane UNI-PHY (without DP support). Changes are related to PHY configuration for electrical parameters tuning to improve eye-diagram and some fixes. Manu Gautam (6): phy: qcom-qmp: Enable pipe_clk before checking USB3 PHY_STATUS phy: qcom-qusb2: Fix crash if nvmem cell not specified dt-bindings: phy-qcom-qmp: Update bindings for sdm845 phy: qcom-qmp: Add QMP V3 USB3 UNI PHY support for sdm845 dt-bindings: phy-qcom-usb2: Update bindings for sdm845 phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845 .../devicetree/bindings/phy/qcom-qmp-phy.txt | 4 +- .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 4 +- drivers/phy/qualcomm/phy-qcom-qmp.c | 166 +++++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 5 + drivers/phy/qualcomm/phy-qcom-qusb2.c | 43 ++++++ 5 files changed, 220 insertions(+), 2 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html