With performance state support for genpd merged, and with some more patches to add support for them in the OPP layer [1] under discussion, this is an effort to model a powerdomain driver to communicate corner/level values for qualcomm platforms to RPM (Remote Power Manager) This series adds data specific to msm8996 and is tested on the db820c. We also modify mmc as one of the first devices to move to using an OPP table and vote on corners using the performance state infrastructure. [1] https://lwn.net/Articles/742136/ Rajendra Nayak (6): soc: qcom: rpmpd: Add a powerdomain driver to model corners dt-bindings: opp: Introduce qcom-opp bindings soc: qcom: rpmpd: Add support for get/set performance state arm64: dts: msm8996: Add rpmpd device node mmc: sdhci-msm: Adapt the driver to use OPPs to set clocks/performance state soc: qcom: rpmpd: Add a max vote on all corners at init Viresh Kumar (1): PM / OPP: Add dev_pm_opp_get_of_node() Documentation/devicetree/bindings/opp/qcom-opp.txt | 25 ++ .../devicetree/bindings/power/qcom,rpmpd.txt | 14 + arch/arm64/boot/dts/qcom/msm8996.dtsi | 87 +++++ drivers/clk/qcom/gcc-msm8996.c | 8 +- drivers/mmc/host/sdhci-msm.c | 57 +++- drivers/opp/of.c | 19 ++ drivers/soc/qcom/Kconfig | 9 + drivers/soc/qcom/Makefile | 1 + drivers/soc/qcom/rpmpd.c | 350 +++++++++++++++++++++ include/linux/pm_opp.h | 5 + 10 files changed, 561 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt create mode 100644 drivers/soc/qcom/rpmpd.c -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
