Re: [PATCH v8 3/5] iommu/arm-smmu: Invoke pm_runtime during probe, add/remove device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 8, 2018 at 9:12 PM, Robin Murphy <robin.murphy@xxxxxxx> wrote:
> On 08/03/18 04:33, Tomasz Figa wrote:
>>
>> On Thu, Mar 8, 2018 at 1:58 AM, Robin Murphy <robin.murphy@xxxxxxx> wrote:
>>>
>>> On 07/03/18 13:52, Tomasz Figa wrote:
>>>>
>>>>
>>>> On Wed, Mar 7, 2018 at 9:38 PM, Robin Murphy <robin.murphy@xxxxxxx>
>>>> wrote:
>>>>>
>>>>>
>>>>> On 02/03/18 10:10, Vivek Gautam wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> From: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>>>>>>
>>>>>> The smmu device probe/remove and add/remove master device callbacks
>>>>>> gets called when the smmu is not linked to its master, that is without
>>>>>> the context of the master device. So calling runtime apis in those
>>>>>> places
>>>>>> separately.
>>>>>>
>>>>>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
>>>>>> [vivek: Cleanup pm runtime calls]
>>>>>> Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
>>>>>> ---
>>>>>>     drivers/iommu/arm-smmu.c | 96
>>>>>> ++++++++++++++++++++++++++++++++++++++++++++----
>>>>>>     1 file changed, 88 insertions(+), 8 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
>>>>>> index c8b16f53f597..3d6a1875431f 100644
>>>>>> --- a/drivers/iommu/arm-smmu.c
>>>>>> +++ b/drivers/iommu/arm-smmu.c
>>>>>> @@ -209,6 +209,8 @@ struct arm_smmu_device {
>>>>>>           struct clk_bulk_data            *clks;
>>>>>>           int                             num_clks;
>>>>>>     +     bool                            rpm_supported;
>>>>>> +
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Can we not automatically infer this from whether clocks and/or power
>>>>> domains
>>>>> are specified or not, then just use pm_runtime_enabled() as the
>>>>> fast-path
>>>>> check as Tomasz originally proposed?
>>>>
>>>>
>>>>
>>>> I wouldn't tie this to presence of clocks, since as a next step we
>>>> would want to actually control the clocks separately. (As far as I
>>>> understand, on QCom SoCs we might want to have runtime PM active for
>>>> the translation to work, but clocks gated whenever access to SMMU
>>>> registers is not needed.) Moreover, you might still have some super
>>>> high scale thousand-core systems that require clocks to be
>>>> prepare-enabled, but runtime PM would be undesirable for the reasons
>>>> we discussed before.
>>>>
>>>>>
>>>>> I worry that relying on statically-defined matchdata is just going to
>>>>> blow
>>>>> up the driver and DT binding into a maintenance nightmare; I really
>>>>> don't
>>>>> want to start needing separate definitions for e.g.
>>>>> "arm,juno-etr-mmu-401"
>>>>> and "arm,juno-hdlcd-mmu-401" just because one otherwise-identical
>>>>> instance
>>>>> within the SoC is in a separate controllable power domain while the
>>>>> others
>>>>> aren't.
>>>>
>>>>
>>>>
>>>> I don't see a reason why both couldn't just have RPM supported
>>>> regardless of whether there is a real power domain. It would
>>>> effectively be just a no-op for those that don't have one.
>>>
>>>
>>>
>>> Because you're then effectively defining "compatible" values for the sake
>>> of
>>> attaching software policy to them, rather than actually describing
>>> different
>>> hardware implementations.
>>>
>>> The fact that RPM can't do anything meaningful unless relevant
>>> clock/power
>>> aspects *are* described, however, means that we shouldn't need additional
>>> information redundant with that. Much like the fact that we don't
>>> *already*
>>> have an "arm,juno-hdlcd-mmu-401" compatible to account for those being
>>> integrated such that IDR0.CTTW has the wrong value, since the presence or
>>> not of the "dma-coherent" property already describes the truth in that
>>> regard.
>>
>>
>> Fair enough.
>>
>>>
>>>> IMHO the
>>>> only reason to avoid having the RPM enabled is the scalability issue
>>>> we discussed before.
>>>
>>>
>>>
>>> Yes, but that's kind of my point; in reality high throughput/minimal
>>> latency
>>> and aggressive power management are more or less mutually exclusive.
>>> Mobile
>>> SoCs with fine-grained clock trees and power domains won't have multiple
>>> 40GBe/NVMf/whatever links running flat out in parallel; conversely
>>> networking/infrastructure/server SoCs aren't designed around saving every
>>> last microamp of leakage current - even in the (fairly unlikely) case of
>>> the
>>> interconnect clocks being software-gateable at all I would be very
>>> surprised
>>> if that were ever exposed directly to Linux (FWIW I believe ACPI
>>> essentially
>>> *requires* clocks to be abstracted behind firmware).
>>>
>>> Realistically then, explicit clocks are only expected on systems which
>>> care
>>> about power management. We can always revisit that assumption if anything
>>> crazy where it isn't the case ever becomes non-theoretical, but for now
>>> it's
>>> one I'm entirely comfortable with. If on the other hand it turns out that
>>> we
>>> can rely on just a power domain being present wherever we want RPM,
>>> making
>>> clocks moot, then all the better.
>>
>>
>> Alright. Since Qcom would be the only user of clock and power handling
>> for the time being, I think checking power domain presence could work
>> for us. +/- the fact that clocks need to be handled even if power
>> domain is not present, but we should normally always have both.
>
>
> Great! (the issue of Qcom-specific clock handling is a separate argument
> which I don't feel like reigniting just now...)
>
>> Now we need a way to do the check. Perhaps for the time being it would
>> be enough to just check for the power-domains property in DT?
>
>
> AFAICS, it might be as simple as arm_smmu_probe() doing this:
>
>         /*
>          * We want to avoid touching dev->power.lock in fastpaths unless
>          * it's really going to do something useful - pm_runtime_enabled()
>          * can serve as an ideal proxy for that decision.
>          */
>         if (dev->pm_domain)
>                 pm_runtime_enable(dev);
>
> or maybe even just gate all the calls with "if (smmu->dev.pm_domain)"
> directly (like pcie-mediatek does), but I'm not sure which would be
> conceptually cleaner.

Okay, that was easier than I expected. Thanks. :)

Actually, there is one more thing that might need rechecking. Are you
sure that dev->pm_domain is NULL for the devices, for which we don't
want runtime PM to be enabled? I think ACPI was mentioned and ACPI
includes the concept of PM domains.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux