Hi Karthik,
On Tue, Feb 27, 2018 at 5:38 PM, Karthikeyan Ramasubramanian
<kramasub@xxxxxxxxxxxxxx> wrote:
> This driver manages the Generic Interface (GENI) firmware based Qualcomm
> Universal Peripheral (QUP) Wrapper. GENI based QUP is the next generation
> programmable module composed of multiple Serial Engines (SE) and supports
> a wide range of serial interfaces like UART, SPI, I2C, I3C, etc. This
> driver also enables managing the serial interface independent aspects of
> Serial Engines.
>
> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
> Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
> Signed-off-by: Girish Mahadevan <girishm@xxxxxxxxxxxxxx>
> ---
> drivers/soc/qcom/Kconfig | 9 +
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/qcom-geni-se.c | 971 ++++++++++++++++++++++++++++++++++++++++
> include/linux/qcom-geni-se.h | 247 ++++++++++
> 4 files changed, 1228 insertions(+)
> create mode 100644 drivers/soc/qcom/qcom-geni-se.c
> create mode 100644 include/linux/qcom-geni-se.h
>
[...]
> diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
> new file mode 100644
> index 0000000..61335b8
> --- /dev/null
> +++ b/drivers/soc/qcom/qcom-geni-se.c
> +
> +/**
> + * geni_se_clk_tbl_get() - Get the clock table to program DFS
> + * @se: Pointer to the concerned Serial Engine.
> + * @tbl: Table in which the output is returned.
> + *
> + * This function is called by the protocol drivers to determine the different
> + * clock frequencies supported by Serial Engine Core Clock. The protocol
> + * drivers use the output to determine the clock frequency index to be
> + * programmed into DFS.
> + *
> + * Return: number of valid performance levels in the table on success,
> + * standard Linux error codes on failure.
> + */
> +int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
> +{
> + struct geni_wrapper *wrapper = se->wrapper;
> + unsigned long freq = 0;
> + int i;
> + int ret = 0;
> +
> + mutex_lock(&wrapper->lock);
> + if (wrapper->clk_perf_tbl) {
> + *tbl = wrapper->clk_perf_tbl;
> + ret = wrapper->num_clk_levels;
> + goto out_unlock;
> + }
> +
> + wrapper->clk_perf_tbl = kcalloc(MAX_CLK_PERF_LEVEL,
> + sizeof(*wrapper->clk_perf_tbl),
> + GFP_KERNEL);
> + if (!wrapper->clk_perf_tbl) {
> + ret = -ENOMEM;
> + goto out_unlock;
> + }
> +
> + for (i = 0; i < MAX_CLK_PERF_LEVEL; i++) {
> + freq = clk_round_rate(se->clk, freq + 1);
> + if (!freq || freq == wrapper->clk_perf_tbl[i - 1])
> + break;
> + wrapper->clk_perf_tbl[i] = freq;
> + }
> + wrapper->num_clk_levels = i;
> + *tbl = wrapper->clk_perf_tbl;
> + ret = wrapper->num_clk_levels;
> +out_unlock:
> + mutex_unlock(&wrapper->lock);
> + return ret;
> +}
> +EXPORT_SYMBOL(geni_se_clk_tbl_get);
I think Bjorn had this feedback before, but if you did this work in
probe you could remove the mutex altogether.
> + wrapper->ahb_clks[0].id = m_ahb_clk;
> + wrapper->ahb_clks[1].id = s_ahb_clk;
> + ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks);
> + if (ret) {
> + dev_err(dev, "Err getting AHB clks %d\n", ret);
> + return ret;
> + }
> +
> + mutex_init(&wrapper->lock);
> + dev_set_drvdata(dev, wrapper);
> + dev_dbg(dev, "GENI SE Driver probed\n");
> + return devm_of_platform_populate(dev);
> +}
> +
> +static int geni_se_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct geni_wrapper *wrapper = dev_get_drvdata(dev);
> +
> + kfree(wrapper->clk_perf_tbl);
Maybe null out clk_perf_tbl for safety?
> diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
> new file mode 100644
> index 0000000..4996de7
> --- /dev/null
> +++ b/include/linux/qcom-geni-se.h
[...]
> +/* SE_DMA_RX_IRQ_STAT Register fields */
> +#define RX_DMA_DONE BIT(0)
> +#define RX_EOT BIT(1)
> +#define RX_SBE BIT(2)
> +#define RX_RESET_DONE BIT(3)
> +#define RX_FLUSH_DONE BIT(4)
> +#define RX_GENI_GP_IRQ GENMASK(10, 5)
> +#define RX_GENI_CANCEL_IRQ BIT(11)
> +#define RX_GENI_GP_IRQ_EXT GENMASK(13, 12)
> +
> +#ifdef CONFIG_QCOM_GENI_SE
I think this needs to be #if IS_ENABLED(CONFIG_QCOM_GENI_SE), since
the function prototypes below won't light up if this is built as a
module.
Thanks,
Evan
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
