On 1/16/2018 11:31 PM, Bjorn Andersson wrote:
On Fri 12 Jan 17:05 PST 2018, Karthikeyan Ramasubramanian wrote:
Add device tree binding support for I2C Controller in GENI based
QUP Wrapper.
Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/i2c/i2c-qcom-geni.txt | 35 ++++++++++++++++++++++
.../devicetree/bindings/soc/qcom/qcom,geni-se.txt | 19 ++++++++++++
2 files changed, 54 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt
new file mode 100644
index 0000000..ea84be7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-geni.txt
@@ -0,0 +1,35 @@
+Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
+
+Required properties:
+ - compatible: Should be:
+ * "qcom,i2c-geni.
As this is a subset of geni it would look better with qcom,geni-i2c
imho.
Ok.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+ - clock-names: Should contain "se-clk".
Omit "clk" from the clock names.
Ok.
+ - clocks: Serial engine core clock needed by the device.
+ - pinctrl-names/pinctrl-0/1: The GPIOs assigned to this core. The names
+ should be "active" and "sleep" for the pin confuguration when core is active
+ or when entering sleep state.
No need to describe pinctrl properties - and your description here
doesn't match the code.
Removed as it is called by the device core before probe.
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional property:
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+ When missing default to 400000Hz.
+
+Child nodes should conform to i2c bus binding.
..."as described in i2c.txt"
Ok.
Regards,
Bjorn
Regards,
Karthik.
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
