Re: [alsa-devel] [PATCH v3 15/25] ASoC: qcom: qdsp6: Add support to q6asm dai driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for your review Rohit,

On 21/02/18 11:14, Rohit Kumar wrote:


On 2/13/2018 10:28 PM, srinivas.kandagatla@xxxxxxxxxx wrote:
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>

This patch adds support to q6asm dai driver which configures Q6ASM streams
to pass pcm data.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
[..]
diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
new file mode 100644
index 000000000000..7c5e94b2ced4
--- /dev/null
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -0,0 +1,621 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2011-2016, The Linux Foundation
+ * Copyright (c) 2017, Linaro Limited
+ */
+
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/pcm.h>
+#include <asm/dma.h>
[..]
+static struct snd_pcm_hw_constraint_list constraints_sample_rates = {
+    .count = ARRAY_SIZE(supported_sample_rates),
+    .list = supported_sample_rates,
+    .mask = 0,
+};
+
+static void event_handler(uint32_t opcode, uint32_t token,
+              uint32_t *payload, void *priv)
+{
+    struct q6asm_dai_rtd *prtd = priv;
+    struct snd_pcm_substream *substream = prtd->substream;
+
+    switch (opcode) {
+    case ASM_CLIENT_EVENT_CMD_RUN_DONE:
Need to add support for V2 version of opcodes
Makes sense, I will add them.

+        q6asm_write_async(prtd->audio_client,
+                   prtd->pcm_count, 0, 0, NO_TIMESTAMP);
+        break;
+    case ASM_CLIENT_EVENT_CMD_EOS_DONE:
+        prtd->state = Q6ASM_STREAM_STOPPED;
+        break;
+    case ASM_CLIENT_EVENT_DATA_WRITE_DONE: {
+        prtd->pcm
[..]
+
+static int q6asm_dai_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+    int ret = 0;
+    struct snd_pcm_runtime *runtime = substream->runtime;
+    struct q6asm_dai_rtd *prtd = runtime->private_data;
+
+    switch (cmd) {
+    case SNDRV_PCM_TRIGGER_START:
+        ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
+        break;
below two cases can be combined with START if no change
Yep, I will do that in next version.

+    case SNDRV_PCM_TRIGGER_RESUME:
+    case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+        ret = q6asm_run_nowait(prtd->audio_client, 0, 0, 0);
+        break;
+    case SNDRV_PCM_TRIGGER_STOP:
+        prtd->state = Q6ASM_STREAM_STOPPED;
+        ret = q6asm_cmd_nowait(prtd->audio_client, CMD_EOS);
+        break;
+    case SNDRV_PCM_TRIGGER_SUSPEND:
+    case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+        ret = q6asm_cmd_nowait(prtd->audio_client, CMD_PAUSE);
+        break;
+    default:
+        ret = -EINVAL;
+        break;
+    }
+
+    return ret;
+}
+
+static int q6asm_dai_open(struct snd_pcm_substream *substream)
+{
+    struct snd_pcm_runtime *runtime = substream->runtime;
+    struct snd_soc_pcm_runtime *soc_prtd = substream->private_data;
+    struct snd_soc_dai *cpu_dai = soc_prtd->cpu_dai;
+
+    struct q6asm_dai_rtd *prtd;
+    struct q6asm_dai_data *pdata;
+    struct device *dev = soc_prtd->platform->dev;
+    int ret = 0;
+    int stream_id;
+
+    stream_id = cpu_dai->driver->id;
+
+    pdata = q6asm_get_dai_data(dev);
+    if (!pdata) {
+        pr_err("Platform data not found ..\n");
+        return -EINVAL;
+    }
+
+    prtd = kzalloc(sizeof(struct q6asm_dai_rtd), GFP_KERNEL);
+    if (prtd == NULL)
+        return -ENOMEM;
+
+    prtd->substream = substream;
+    prtd->audio_client = q6asm_audio_client_alloc(dev,
+                (q6asm_cb)event_handler, prtd, stream_id);
+    if (!prtd->audio_client) {
+        pr_info("%s: Could not allocate memory\n", __func__);
+        kfree(prtd);
+        return -ENOMEM;
+    }
+
+//    prtd->audio_client->dev = dev;
cleanup this
Sure!

+
+    if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+        runtime->hw = q6asm_dai_hardware_playback;
+
+    ret = snd_pcm_hw_constraint_list(runtime, 0,
+                SNDRV_PCM_HW_PARAM_RATE,
+                &constraints_sample_rates);
[..]
+
+static int q6asm_dai_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+    struct snd_pcm_substream *substream;
+    struct of_phandle_args args;
+    struct device_node *node;
+    struct q6asm_dai_data *pdata;
+    struct snd_pcm *pcm = rtd->pcm;
+    struct device *dev;
+    int size, ret;
+
+    dev = rtd->platform->dev->parent;
+    node = dev->of_node;
+    pdata = q6asm_get_dai_data(rtd->platform->dev);
+
+    ret = of_parse_phandle_with_fixed_args(node, "iommus", 1, 0, &args);
+    if (ret < 0)
+        pdata->sid = -1;
+    else
+        pdata->sid = args.args[0];
+
+
+
iommus for sdm845 is 16bit value. we need to have sid_mask which is 0x1 in sdm845. We need to mask sid with 0x1 to get proper sid.
pdata->sid &= 0x1;

Okay, I will take closer look at sdm845 and other socs, and make it more generic in next version.



+    substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
+    size = q6asm_dai_hardware_playback.buffer_bytes_max;
+    ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, dev, size,
+                  &substream->dma_buffer);
+    if (ret)
+        dev_err(dev, "Cannot allocate buffer(s)\n");
+
+    return ret;
+}
+


--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux