Hi Bjorn,
On 2/13/2018 7:07 AM, Bjorn Andersson wrote:
On some platform the remote processor's memory map is not statically
configured in TrustZone, so each memory region that is to be accessed by
the remote needs a call into TrustZone to set up the remote's
permissions.
Implement this for the rmtfs memory driver, to give the modem on 8996
access to the shared file system buffers.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
drivers/soc/qcom/Kconfig | 1 +
drivers/soc/qcom/rmtfs_mem.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+)
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index e050eb83341d..a993d19fa562 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -47,6 +47,7 @@ config QCOM_QMI_HELPERS
config QCOM_RMTFS_MEM
tristate "Qualcomm Remote Filesystem memory driver"
depends on ARCH_QCOM
+ select QCOM_SCM
help
The Qualcomm remote filesystem memory driver is used for allocating
and exposing regions of shared memory with remote processors for the
diff --git a/drivers/soc/qcom/rmtfs_mem.c b/drivers/soc/qcom/rmtfs_mem.c
index 0a43b2e8906f..c8999e38b005 100644
--- a/drivers/soc/qcom/rmtfs_mem.c
+++ b/drivers/soc/qcom/rmtfs_mem.c
@@ -37,6 +37,8 @@ struct qcom_rmtfs_mem {
phys_addr_t size;
unsigned int client_id;
+
+ unsigned int perms;
};
static ssize_t qcom_rmtfs_mem_show(struct device *dev,
@@ -151,9 +153,11 @@ static void qcom_rmtfs_mem_release_device(struct device *dev)
static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
+ struct qcom_scm_vmperm perms[2];
struct reserved_mem *rmem;
struct qcom_rmtfs_mem *rmtfs_mem;
u32 client_id;
+ u32 vmid;
int ret;
rmem = of_reserved_mem_lookup(node);
@@ -204,10 +208,31 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
rmtfs_mem->dev.release = qcom_rmtfs_mem_release_device;
+ ret = of_property_read_u32(node, "qcom,vmid", &vmid);
+ if (ret < 0 && ret != -EINVAL) {
+ dev_err(&pdev->dev, "failed to parse qcom,vmid\n");
+ goto remove_cdev;
+ } else if (!ret) {
+ perms[0].vmid = QCOM_SCM_VMID_HLOS;
+ perms[0].perm = QCOM_SCM_PERM_RW;
+ perms[1].vmid = vmid;
+ perms[1].perm = QCOM_SCM_PERM_RW;
+
+ rmtfs_mem->perms = BIT(QCOM_SCM_VMID_HLOS);
+ ret = qcom_scm_assign_mem(rmtfs_mem->addr, rmtfs_mem->size,
+ &rmtfs_mem->perms, perms, 2);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "assign memory failed\n");
+ goto remove_cdev;
+ }
+ }
+
I have a query here,
We assigned memory ownership to modem at boot up. In case of errors in
other parts of driver, where we are returning, have we assigned memory
back to HLOS
dev_set_drvdata(&pdev->dev, rmtfs_mem);
return 0;
+remove_cdev:
+ cdev_device_del(&rmtfs_mem->cdev, &rmtfs_mem->dev);
put_device:
put_device(&rmtfs_mem->dev);
@@ -217,6 +242,15 @@ static int qcom_rmtfs_mem_probe(struct platform_device *pdev)
static int qcom_rmtfs_mem_remove(struct platform_device *pdev)
{
struct qcom_rmtfs_mem *rmtfs_mem = dev_get_drvdata(&pdev->dev);
+ struct qcom_scm_vmperm perm;
+
+ if (rmtfs_mem->perms) {
+ perm.vmid = QCOM_SCM_VMID_HLOS;
+ perm.perm = QCOM_SCM_PERM_RW;
+
+ qcom_scm_assign_mem(rmtfs_mem->addr, rmtfs_mem->size,
+ &rmtfs_mem->perms, &perm, 1);
+ }
cdev_device_del(&rmtfs_mem->cdev, &rmtfs_mem->dev);
put_device(&rmtfs_mem->dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
