These are basic device tree files needed to boot a SDM845 MTP board to a ramfs based serial console shell Bindings are based on whats proposed for pinctrl/serial/clock drivers for SDM845 SoC pinctrl: https://patchwork.kernel.org/patch/10157143/ (This is now pulled in by Linus Walleij for 4.17) clocks: https://lkml.org/lkml/2018/1/31/209 (under review) serial: https://patchwork.ozlabs.org/cover/860251/ (under review) 'PATCH 3/3' is based on v2 of serial patches, will need an update if v3 (still in the works) has further binding updates Since 'PATCH 2/3' also adds an ITS node and keeps it disabled, we also depend on https://lkml.org/lkml/2018/1/29/383 changes in v4: * pull config changes to uart pins * License in device tree files is still GPL-2.0 changes in v3: * split the pinmux/pinconf nodes across SoC/Board files * Fixes for issues reported with 'make dtbs W=2' * other minor fixes based on review changes in v2: * dropped cpu-map * dropped GIC_CPU_MASK_SIMPLE() * Added new cpu compatible for kryo385 * added ITS node, marked as disabled Rajendra Nayak (4): dt-bindings: arm: Document kryo385 cpu dt-bindings: qcom: Add SDM845 bindings arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP arm64: dts: sdm845: Add serial console support Documentation/devicetree/bindings/arm/cpus.txt | 1 + Documentation/devicetree/bindings/arm/qcom.txt | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 54 +++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 316 +++++++++++++++++++++++++ 5 files changed, 373 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
