On Mon, Feb 5, 2018 at 8:16 PM, Georgi Djakov <georgi.djakov@xxxxxxxxxx> wrote:
> Add a CPU OPP table to allow CPU frequency scaling on msm8916 platforms.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
For this series, please feel free to add my
Reviewed-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
Tested-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
It enables basic cpufreq on the DB410c in mainline after enabling
QCOM_APCS_IPC. I'll send out another patch to automatically select
this Kconfig option.
> ---
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 4539571a36b2..e4682779eec7 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -113,6 +113,8 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> + clocks = <&apcs 0>;
> + operating-points-v2 = <&cpu_opp_table>;
> };
>
> CPU1: cpu@1 {
> @@ -122,6 +124,8 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> + clocks = <&apcs 0>;
> + operating-points-v2 = <&cpu_opp_table>;
> };
>
> CPU2: cpu@2 {
> @@ -131,6 +135,8 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> + clocks = <&apcs 0>;
> + operating-points-v2 = <&cpu_opp_table>;
> };
>
> CPU3: cpu@3 {
> @@ -140,6 +146,8 @@
> next-level-cache = <&L2_0>;
> enable-method = "psci";
> cpu-idle-states = <&CPU_SPC>;
> + clocks = <&apcs 0>;
> + operating-points-v2 = <&cpu_opp_table>;
> };
>
> L2_0: l2-cache {
> @@ -212,6 +220,24 @@
>
> };
>
> + cpu_opp_table: cpu_opp_table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + };
> + opp-400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + };
> + opp-800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + };
> + opp-998400000 {
> + opp-hz = /bits/ 64 <998400000>;
> + };
> + };
> +
> gpu_opp_table: opp_table {
> compatible = "operating-points-v2";
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
