On 2018-01-29 10:41, Sricharan R wrote:
Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts | 14 ++++++++++++++
2 files changed, 15 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 68e4b15..0104ba2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -727,6 +727,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-ipq4019-ap.dk01.1-c2.dtb \
qcom-ipq4019-ap.dk04.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c5.dtb \
+ qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
new file mode 100644
index 0000000..7a93fc4
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019-ap.dk04.1.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
+
+ soc {
+ nand: qpic-nand@79b0000 {
+ status = "disabled";
+ };
Normally we need to disable in base dtsi and enable in
board dtsi so that base dtsi will always work in all the
boards. Now If We load the base dtsi in any DK04 board
other than C1, then nand failure will come.
Thanks,
Abhishek
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
