[PATCH 10/12] i2c: qup: send NACK for last read sub transfers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



According to I2c specification, “If a master-receiver sends a
repeated START condition, it sends a not-acknowledge (A) just
before the repeated START condition”. QUP v2 supports sending
of NACK without stop with QUP_TAG_V2_DATARD_NACK so added the
same.

Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-qup.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index ba717bb..edea3b9 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -113,6 +113,7 @@
 #define QUP_TAG_V2_DATAWR              0x82
 #define QUP_TAG_V2_DATAWR_STOP         0x83
 #define QUP_TAG_V2_DATARD              0x85
+#define QUP_TAG_V2_DATARD_NACK         0x86
 #define QUP_TAG_V2_DATARD_STOP         0x87
 
 /* Status, Error flags */
@@ -609,7 +610,9 @@ static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
 			tags[len++] = QUP_TAG_V2_DATAWR_STOP;
 	} else {
 		if (msg->flags & I2C_M_RD)
-			tags[len++] = QUP_TAG_V2_DATARD;
+			tags[len++] = qup->blk.pos == (qup->blk.count - 1) ?
+				      QUP_TAG_V2_DATARD_NACK :
+				      QUP_TAG_V2_DATARD;
 		else
 			tags[len++] = QUP_TAG_V2_DATAWR;
 	}
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux