Add the qup uart node and geni se instance needed to support the serial console on the MTP. Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> --- This patch is based on the current proposed DT bindings for the geni based serial driver [1] and also depends on the GCC driver [2] which adds dt-bindings/clock/qcom,gcc-sdm845.h header. This can only be merged once the dependent patches do. [1] https://patchwork.ozlabs.org/cover/860251/ [2] https://lkml.org/lkml/2018/1/22/78 arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi | 3 +++ arch/arm64/boot/dts/qcom/sdm845-pins.dtsi | 32 +++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 22 +++++++++++++++++++++ 3 files changed, 57 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-pins.dtsi diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi b/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi index 5b1022c20bad..640a48cd628b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi @@ -7,5 +7,8 @@ / { soc { + serial@a84000 { + status = "okay"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-pins.dtsi b/arch/arm64/boot/dts/qcom/sdm845-pins.dtsi new file mode 100644 index 000000000000..b97f99e6f4b4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-pins.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +&tlmm { + qup_uart2_default: qup_uart2_default { + pinmux { + function = "qup9"; + pins = "gpio4", "gpio5"; + }; + + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_uart2_sleep: qup_uart2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index a21f4912b3e2..529f4ba3a1db 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sdm845.h> / { model = "Qualcomm Technologies, Inc. SDM845"; @@ -304,5 +305,26 @@ cell-index = <0>; }; + qup_1: qcom,geni_se@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0xac0000 0x6000>; + }; + + qup_uart2: serial@a84000 { + compatible = "qcom,geni-console", "qcom,geni-uart"; + reg = <0xa84000 0x4000>; + reg-names = "se_phys"; + clock-names = "se-clk", "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>, + <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_uart2_default>; + pinctrl-1 = <&qup_uart2_sleep>; + interrupts = <GIC_SPI 354 IRQ_TYPE_NONE>; + qcom,wrapper-core = <&qup_1>; + status = "disabled"; + }; }; }; +#include "sdm845-pins.dtsi" -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
