[PATCH 6/7] dt-bindings: display: msm/dsi: Add compatible for 14nm DSI PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add the compatible string for 14nm DSI PHY (used in MSM8996/APQ8096).
>From 14nm PHY onwards, the "dsi_phy_regulator" reg-name is not required,
but "dsi_phy_lane" reg-name is. Update the doc to specify the reg-names
each PHY revision needs.

Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/display/msm/dsi.txt | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 9c3ad6bbb9f0..26a1796b7145 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -86,12 +86,19 @@ Required properties:
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
   * "qcom,dsi-phy-28nm-8960"
-- reg: Physical base address and length of the registers of PLL, PHY and PHY
-  regulator
+  * "qcom,dsi-phy-14nm"
+- reg: Physical base address and length of the registers of PLL, PHY. Some
+  revisions require the PHY regulator base address, whereas others require the
+  PHY lane base address. See below for each PHY revision.
 - reg-names: The names of register regions. The following regions are required:
+  For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
   * "dsi_pll"
   * "dsi_phy"
   * "dsi_phy_regulator"
+  For DSI 14nm PHY:
+  * "dsi_pll"
+  * "dsi_phy"
+  * "dsi_phy_lane"
 - clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
   2 clocks: A byte clock (index 0), and a pixel clock (index 1).
 - power-domains: Should be <&mmcc MDSS_GDSC>.
@@ -102,6 +109,8 @@ Required properties:
 - vddio-supply: phandle to vdd-io regulator device node
   For 20nm PHY:
 - vddio-supply: phandle to vdd-io regulator device node
+- vcca-supply: phandle to vcca regulator device node
+  For 14nm PHY:
 - vcca-supply: phandle to vcca regulator device node
 
 Optional properties:
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux