Update compatible string and clock names for QMP version V3 USB PHY. Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index b6a9f2b..dcf1b8f 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -8,7 +8,8 @@ Required properties: - compatible: compatible list, contains: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, - "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. + "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, + "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy. - reg: offset and length of register set for PHY's common serdes block. @@ -25,10 +26,13 @@ Required properties: - clock-names: "cfg_ahb" for phy config clock, "aux" for phy aux clock, "ref" for 19.2 MHz ref clk, + "com_aux" for phy common block aux clock, For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,qmp-v3-usb3-phy" must contain: + "aux", "cfg_ahb", "ref", "com_aux". - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
