On Wed, Jan 3, 2018 at 4:58 PM, Manu Gautam <mgautam@xxxxxxxxxxxxxx> wrote:
> PHY must be powered on before turning ON clocks and
> attempting to initialize it. Driver is exposing
> separate init and power_on routines for this.
> Apparently USB dwc3 core driver performs power-on
> after init. Also, poweron and init for QUSB2 PHY
> need to be executed together always, hence remove
> poweron callback from phy_ops and explicitly perform
> this from init, similar changes needed for poweroff.
>
> Signed-off-by: Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> ---
Looks good.
Reviewed-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
Thanks
Vivek
> drivers/phy/qualcomm/phy-qcom-qusb2.c | 47 +++++++++++------------------------
> 1 file changed, 15 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index 6c57524..4a5b2a1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -195,54 +195,31 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
> qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4);
> }
>
> -static int qusb2_phy_poweron(struct phy *phy)
> +static int qusb2_phy_init(struct phy *phy)
> {
> struct qusb2_phy *qphy = phy_get_drvdata(phy);
> - int num = ARRAY_SIZE(qphy->vregs);
> + unsigned int val;
> + unsigned int clk_scheme;
> int ret;
>
> - dev_vdbg(&phy->dev, "%s(): Powering-on QUSB2 phy\n", __func__);
> + dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
>
> /* turn on regulator supplies */
> - ret = regulator_bulk_enable(num, qphy->vregs);
> + ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
> if (ret)
> return ret;
>
> ret = clk_prepare_enable(qphy->iface_clk);
> if (ret) {
> dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
> - regulator_bulk_disable(num, qphy->vregs);
> - return ret;
> + goto poweroff_phy;
> }
>
> - return 0;
> -}
> -
> -static int qusb2_phy_poweroff(struct phy *phy)
> -{
> - struct qusb2_phy *qphy = phy_get_drvdata(phy);
> -
> - clk_disable_unprepare(qphy->iface_clk);
> -
> - regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
> -
> - return 0;
> -}
> -
> -static int qusb2_phy_init(struct phy *phy)
> -{
> - struct qusb2_phy *qphy = phy_get_drvdata(phy);
> - unsigned int val;
> - unsigned int clk_scheme;
> - int ret;
> -
> - dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
> -
> /* enable ahb interface clock to program phy */
> ret = clk_prepare_enable(qphy->cfg_ahb_clk);
> if (ret) {
> dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
> - return ret;
> + goto disable_iface_clk;
> }
>
> /* Perform phy reset */
> @@ -344,6 +321,11 @@ static int qusb2_phy_init(struct phy *phy)
> reset_control_assert(qphy->phy_reset);
> disable_ahb_clk:
> clk_disable_unprepare(qphy->cfg_ahb_clk);
> +disable_iface_clk:
> + clk_disable_unprepare(qphy->iface_clk);
> +poweroff_phy:
> + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
> +
> return ret;
> }
>
> @@ -361,6 +343,9 @@ static int qusb2_phy_exit(struct phy *phy)
> reset_control_assert(qphy->phy_reset);
>
> clk_disable_unprepare(qphy->cfg_ahb_clk);
> + clk_disable_unprepare(qphy->iface_clk);
> +
> + regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
>
> return 0;
> }
> @@ -368,8 +353,6 @@ static int qusb2_phy_exit(struct phy *phy)
> static const struct phy_ops qusb2_phy_gen_ops = {
> .init = qusb2_phy_init,
> .exit = qusb2_phy_exit,
> - .power_on = qusb2_phy_poweron,
> - .power_off = qusb2_phy_poweroff,
> .owner = THIS_MODULE,
> };
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
