On 10/01/18 14:57, Felipe Balbi wrote: > > Hi, > > Roger Quadros <rogerq@xxxxxx> writes: >> Hi Manu, >> >> On 27/09/17 14:19, Manu Gautam wrote: >>> Driver powers-off PHYs and reinitializes DWC3 core and gadget on >>> resume. While this works fine for gadget mode but in host >>> mode there is not re-initialization of host stack. Also, resetting >>> bus as part of bus_suspend/resume is not correct which could affect >>> (or disconnect) connected devices. >>> Fix this by not reinitializing core on suspend/resume in host mode >>> for HOST only and OTG/drd configurations. >>> >> >> All this seems correct but we (TI) were relying on dwc3_core_exit() to be called >> during dwc3_suspend() to have the lowest power state for our platforms. >> >> After this patch, DWC3 controller and PHYs won't be turned off thus >> preventing our platform from reaching low power levels. >> >> So this is a regression for us (TI) in v4.15-rc. >> >> Felipe, do you agree? >> >> If yes I can send a patch which fixes the regression >> and also makes USB host work after suspend/resume. > > A power consumption regression is still a regression. But it's super > late in the -rc cycle, I think we need to get this merged after 4.16-rc1 > and make sure to Cc stable. > > Should be more than enough time to review and test patches. > Fine with me. -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html