Thanks for the review comments.
On 03/01/18 00:16, Bjorn Andersson wrote:
On Thu 14 Dec 09:34 PST 2017, srinivas.kandagatla@xxxxxxxxxx wrote:
From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
uThis patch adds support to DB820c machine driver.
Drop 'u' and expand the message to claim that this is the machine driver
for 8996, used by the db820c.
[..]
+static struct snd_soc_dai_link msm8996_dai_links[] = {
Are there any differences between the DAI links of apq8096 and msm8996?
This driver is more of board specific,
Am not 100% sure about msm8996, on apq8096 in particularly on db820c we
got hdmi and analog audio connected via slimbus and also I2S on lowspeed
connector.
+ /* FrontEnd DAI Links */
+ {
+ .name = "MultiMedia1 Playback",
+ .stream_name = "MultiMedia1",
+ .cpu_dai_name = "MM_DL1",
+ .platform_name = "q6asm_dai",
+ .dynamic = 1,
+ .dpcm_playback = 1,
+
+ .codec_dai_name = "snd-soc-dummy-dai",
+ .codec_name = "snd-soc-dummy",
+ },
+ /* Backend DAI Links */
+ {
+ .name = "HDMI Playback",
+ .stream_name = "q6afe_dai",
+ .cpu_dai_name = "HDMI",
+ .platform_name = "q6routing",
+ .no_pcm = 1,
+ .dpcm_playback = 1,
+ .be_hw_params_fixup = msm8996_be_hw_params_fixup,
+ .codec_dai_name = "i2s-hifi",
+ .codec_name = "hdmi-audio-codec.0.auto",
+ },
+};
+
+static int apq8096_sbc_parse_of(struct snd_soc_card *card)
msm8996_parse_of()
sure if it helps.
+{
+ struct device *dev = card->dev;
+ int ret;
+
+ ret = snd_soc_of_parse_card_name(card, "qcom,model");
+ if (ret)
+ dev_err(dev, "Error parsing card name: %d\n", ret);
+
+ return ret;
+}
+
+static int msm_snd_apq8096_probe(struct platform_device *pdev)
msm_snd_msm8996_probe()?
sure
+{
+ int ret;
+ struct snd_soc_card *card;
+
+ card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
+ if (!card)
+ return -ENOMEM;
+
+ card->dev = &pdev->dev;
+
+ ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ card->dai_link = msm8996_dai_links;
+ card->num_links = ARRAY_SIZE(msm8996_dai_links);
+
+ ret = apq8096_sbc_parse_of(card);
+ if (ret) {
+ dev_err(&pdev->dev, "Error parsing OF data\n");
No need to print in both parse_of() and here.
yep.
+ return ret;
+ }
+
+ ret = devm_snd_soc_register_card(&pdev->dev, card);
+ if (ret)
+ dev_err(&pdev->dev, "sound card register failed (%d)!\n", ret);
+ else
+ dev_err(&pdev->dev, "sound card register Sucessfull\n");
This isn't an error, skip the print here.
yep.
+
+ return ret;
+}
+
+static const struct of_device_id msm_snd_apq8096_dt_match[] = {
+ {.compatible = "qcom,apq8096-sndcard"},
+ {}
+};
+
+static struct platform_driver msm_snd_apq8096_driver = {
+ .probe = msm_snd_apq8096_probe,
+ .driver = {
+ .name = "msm-snd-apq8096",
+ .owner = THIS_MODULE,
Drop the .owner
yep
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
