pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't
extract the domain number. Other places, use the actual domain number from
the device.
Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
---
drivers/video/fbdev/riva/nv_driver.c | 4 ++--
drivers/video/fbdev/riva/riva_hw.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/video/fbdev/riva/nv_driver.c b/drivers/video/fbdev/riva/nv_driver.c
index f3694cf..d31f51b 100644
--- a/drivers/video/fbdev/riva/nv_driver.c
+++ b/drivers/video/fbdev/riva/nv_driver.c
@@ -226,12 +226,12 @@ unsigned long riva_get_memlen(struct riva_par *par)
case NV_ARCH_30:
if(chipset == NV_CHIP_IGEFORCE2) {
- dev = pci_get_bus_and_slot(0, 1);
+ dev = pci_get_domain_bus_and_slot(0, 0, 1);
pci_read_config_dword(dev, 0x7C, &amt);
pci_dev_put(dev);
memlen = (((amt >> 6) & 31) + 1) * 1024;
} else if (chipset == NV_CHIP_0x01F0) {
- dev = pci_get_bus_and_slot(0, 1);
+ dev = pci_get_domain_bus_and_slot(0, 0, 1);
pci_read_config_dword(dev, 0x84, &amt);
pci_dev_put(dev);
memlen = (((amt >> 4) & 127) + 1) * 1024;
diff --git a/drivers/video/fbdev/riva/riva_hw.c b/drivers/video/fbdev/riva/riva_hw.c
index 8bdf37f..29956df 100644
--- a/drivers/video/fbdev/riva/riva_hw.c
+++ b/drivers/video/fbdev/riva/riva_hw.c
@@ -1117,7 +1117,7 @@ static char nv3_get_param(nv3_fifo_info *res_info, nv3_sim_state * state, nv3_ar
unsigned int uMClkPostDiv;
struct pci_dev *dev;
- dev = pci_get_bus_and_slot(0, 3);
+ dev = pci_get_domain_bus_and_slot(0, 0, 3);
pci_read_config_dword(dev, 0x6C, &uMClkPostDiv);
pci_dev_put(dev);
uMClkPostDiv = (uMClkPostDiv >> 8) & 0xf;
@@ -1132,7 +1132,7 @@ static char nv3_get_param(nv3_fifo_info *res_info, nv3_sim_state * state, nv3_ar
sim_data.enable_video = 0;
sim_data.enable_mp = 0;
- dev = pci_get_bus_and_slot(0, 1);
+ dev = pci_get_domain_bus_and_slot(0, 0, 1);
pci_read_config_dword(dev, 0x7C, &sim_data.memory_type);
pci_dev_put(dev);
sim_data.memory_type = (sim_data.memory_type >> 12) & 1;
@@ -2118,12 +2118,12 @@ static char nv3_get_param(nv3_fifo_info *res_info, nv3_sim_state * state, nv3_ar
* Fill in chip configuration.
*/
if(chipset == NV_CHIP_IGEFORCE2) {
- dev = pci_get_bus_and_slot(0, 1);
+ dev = pci_get_domain_bus_and_slot(0, 0, 1);
pci_read_config_dword(dev, 0x7C, &amt);
pci_dev_put(dev);
chip->RamAmountKBytes = (((amt >> 6) & 31) + 1) * 1024;
} else if(chipset == NV_CHIP_0x01F0) {
- dev = pci_get_bus_and_slot(0, 1);
+ dev = pci_get_domain_bus_and_slot(0, 0, 1);
pci_read_config_dword(dev, 0x84, &amt);
pci_dev_put(dev);
chip->RamAmountKBytes = (((amt >> 4) & 127) + 1) * 1024;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
