On Montag, 20. November 2017 20:56:47 CET Bjorn Andersson wrote: > Not all instances of the SDCC core supports changing signal voltage and > as such will not generate a power interrupt when the software attempts > to change the voltage. This results in probing the eMMC on some devices > to take over 2 minutes. > > Check that the SWITCHABLE_SIGNALING_VOLTAGE bit in MCI_GENERICS is set > before waiting for the power interrupt. > > Cc: Sahitya Tummala <stummala@xxxxxxxxxxxxxx> > Cc: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx> > Fixes: c0309b3803fe ("mmc: sdhci-msm: Add sdhci msm register write APIs > which wait for pwr irq") Signed-off-by: Bjorn Andersson > <bjorn.andersson@xxxxxxxxxx> Tested-by: Luca Weiss <luca@xxxxxxxxx> > --- > > The offending patch is part of your v4.15 pull request, so please pick > this up for the -rcs. > > Changes since v1: > - Fixed spelling of swichable... > > drivers/mmc/host/sdhci-msm.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c > index 3fb7d2eec93f..c283291db705 100644 > --- a/drivers/mmc/host/sdhci-msm.c > +++ b/drivers/mmc/host/sdhci-msm.c > @@ -29,6 +29,9 @@ > #define CORE_VERSION_MAJOR_MASK (0xf << CORE_VERSION_MAJOR_SHIFT) > #define CORE_VERSION_MINOR_MASK 0xff > > +#define CORE_MCI_GENERICS 0x70 > +#define SWITCHABLE_SIGNALING_VOLTAGE BIT(29) > + > #define CORE_HC_MODE 0x78 > #define HC_MODE_EN 0x1 > #define CORE_POWER 0x0 > @@ -1028,11 +1031,22 @@ static void sdhci_msm_check_power_status(struct > sdhci_host *host, u32 req_type) struct sdhci_pltfm_host *pltfm_host = > sdhci_priv(host); > struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); > bool done = false; > + u32 val; > > pr_debug("%s: %s: request %d curr_pwr_state %x curr_io_level %x\n", > mmc_hostname(host->mmc), __func__, req_type, > msm_host->curr_pwr_state, msm_host->curr_io_level); > > + /* > + * The power interrupt will not be generated for signal voltage > + * switches if SWITCHABLE_SIGNALING_VOLTAGE in MCI_GENERICS is not set. > + */ > + val = readl(msm_host->core_mem + CORE_MCI_GENERICS); > + if ((req_type & REQ_IO_HIGH || req_type & REQ_IO_LOW) && > + !(val & SWITCHABLE_SIGNALING_VOLTAGE)) { > + return; > + } > + > /* > * The IRQ for request type IO High/LOW will be generated when - > * there is a state change in 1.8V enable bit (bit 3) of -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html