Re: [PATCH V6] clk: qcom: Add spmi_pmic clock divider support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/18/2017 1:52 AM, Rob Herring wrote:
On Fri, Nov 17, 2017 at 03:18:47PM +0530, Tirupathi Reddy wrote:
Clkdiv module provides a clock output on the PMIC with CXO as
the source. This clock can be routed through PMIC GPIOs. Add
a device driver to configure this clkdiv module.

Signed-off-by: Tirupathi Reddy <tirupath@xxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Normally your S-o-B would be last.
Addressed in next patch version [7]

---
  .../bindings/clock/clk-spmi-pmic-div.txt           |  59 ++++
Please split bindings to a separate patch.
Addressed in next patch version [7]

Otherwise,

Acked-by: Rob Herring <robh@xxxxxxxxxx>

  drivers/clk/qcom/Kconfig                           |   9 +
  drivers/clk/qcom/Makefile                          |   1 +
  drivers/clk/qcom/clk-spmi-pmic-div.c               | 308 +++++++++++++++++++++
  4 files changed, 377 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt
  create mode 100644 drivers/clk/qcom/clk-spmi-pmic-div.c

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux