Re: [PATCH] mmc: sdhci-msm: Optionally wait for signal level changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/20, Bjorn Andersson wrote:
> Not all instances of the SDCC core supports changing signal voltage and
> as such will not generate a power interrupt when the software attempts
> to change the voltage. This results in probing the eMMC on some devices
> to take over 2 minutes.
> 
> Check that the SWITCHABLE_SIGNAL_VOLTAGE bit in MCI_GENERICS is set

T in SWITCHABLE_SIGNAL_VOLTAGE here.

> before waiting for the power interrupt.
> 
> Cc: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
> Cc: Vijay Viswanath <vviswana@xxxxxxxxxxxxxx>
> Fixes: c0309b3803fe ("mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr irq")
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> 
> The offending patch is part of your v4.15 pull request, so please pick
> this up for the -rcs.
> 
>  drivers/mmc/host/sdhci-msm.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 3fb7d2eec93f..8f2dda73e6b4 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -29,6 +29,9 @@
>  #define CORE_VERSION_MAJOR_MASK		(0xf << CORE_VERSION_MAJOR_SHIFT)
>  #define CORE_VERSION_MINOR_MASK		0xff
>  
> +#define CORE_MCI_GENERICS		0x70
> +#define SWICHABLE_SIGNALING_VOLTAGE	BIT(29)

But then the T isn't here.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux