On Wed, Nov 15, 2017 at 02:10:40PM +0000, srinivas.kandagatla@xxxxxxxxxx wrote:
> From: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
>
> This patch add device tree bindings for Qualcomm slimbus controller.
>
> Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
> .../devicetree/bindings/slimbus/slim-qcom-ctrl.txt | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> new file mode 100644
> index 000000000000..e4d28910b2e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> @@ -0,0 +1,43 @@
> +Qualcomm SLIMBUS controller
> +This controller is used if applications processor driver controls slimbus
> +master component.
> +
> +Required properties:
> +
> + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
> + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
> +
> + - reg : Offset and length of the register region(s) for the device
> + - reg-names : Register region name(s) referenced in reg above
> + Required register resource entries are:
> + "ctrl": Physical address of controller register blocks
> + - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
> + followed by "qcom,slim" for fallback.
> + - interrupts : Interrupt number used by this controller
> + - clocks : Interface and core clocks used by this slimbus controller
> + - clock-names : Required clock-name entries are:
> + "iface_clk" : Interface clock for this controller
> + "core_clk" : Interrupt for controller core's BAM
> +
> +
> +Optional property:
> + - reg entry for slew rate : If slew rate control register is provided, this
> + entry should be used.
> + - reg-name for slew rate: "slew"
reg-names
I'd prefer it be explicit as to which compatibles do or don't have this
register.
> +
> +Example:
> +
> + slim@28080000 {
> + compatible = "qcom,apq8064-slim", "qcom,slim";
> + reg = <0x28080000 0x2000>,
error ^
> + interrupts = <0 33 0>;
> + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
> + clock-names = "iface", "core";
> + #address-cells = <2>;
> + #size-cell = <0>;
> +
> + codec: wcd9310@1,0{
Use generic node names:
wcd9310: audio-codec@1,0
> + compatible = "slim217,60";
> + reg = <1 0>;
> + };
> + };
> --
> 2.15.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
