On 13/10/17 20:26, Rob Herring wrote:
On Fri, Oct 06, 2017 at 05:51:30PM +0200, srinivas.kandagatla@xxxxxxxxxx wrote:
From: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
SLIMbus (Serial Low Power Interchip Media Bus) is a specification
developed by MIPI (Mobile Industry Processor Interface) alliance.
SLIMbus is a 2-wire implementation, which is used to communicate with
peripheral components like audio-codec.
SLIMbus uses Time-Division-Multiplexing to accommodate multiple data
channels, and control channel. Control channel has messages to do
device-enumeration, messages to send/receive control-data to/from
slimbus devices, messages for port/channel management, and messages to
do bandwidth allocation.
The framework supports multiple instances of the bus (1 controller per
bus), and multiple slave devices per controller.
This patch does device enumeration, logical address assignment,
informing device when the device reports present/absent etc.
Reporting present may need the driver to do the needful (e.g. turning
on voltage regulators powering the device). Additionally device is
probed when it reports present if that device doesn't need any such
steps mentioned above.
Signed-off-by: Sagar Dharia <sdharia@xxxxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
Documentation/devicetree/bindings/slimbus/bus.txt | 57 ++
Split to separate patch.
Will do this in next patch.
It was suggested by Arnd in v5, may be just of_parse code can be merged
in this patch and the bindings made as separate patch.
Documentation/slimbus/summary | 109 ++++
drivers/Kconfig | 2 +
drivers/Makefile | 1 +
drivers/slimbus/Kconfig | 11 +
drivers/slimbus/Makefile | 5 +
drivers/slimbus/slim-core.c | 695 ++++++++++++++++++++++
include/linux/mod_devicetable.h | 13 +
include/linux/slimbus.h | 299 ++++++++++
9 files changed, 1192 insertions(+)
create mode 100644 Documentation/devicetree/bindings/slimbus/bus.txt
create mode 100644 Documentation/slimbus/summary
create mode 100644 drivers/slimbus/Kconfig
create mode 100644 drivers/slimbus/Makefile
create mode 100644 drivers/slimbus/slim-core.c
create mode 100644 include/linux/slimbus.h
diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt
new file mode 100644
index 0000000..cb658bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/slimbus/bus.txt
@@ -0,0 +1,57 @@
+SLIM(Serial Low Power Interchip Media Bus) bus
+
+SLIMbus is a 2-wire bus, and is used to communicate with peripheral
+components like audio-codec.
+
+Controller is a normal device using binding for whatever bus it is
+on (e.g. platform bus).
I can't have a PCI based slimbus controller? "platform bus" is a
Linuxism.
I agree, Will remove this Linuxism from the bindings.
+Required property for SLIMbus controller node:
+- compatible - name of SLIMbus controller following generic names
+ recommended practice.
generic names aren't recommended. Allowed with some conditons, yes.
+- #address-cells - should be 2
You used 4 for your controller.
It should be actually 2. I will fix such mismatches in the other patches.
+- #size-cells - should be 0
+
+No other properties are required in the SLIMbus controller bus node.
That's not a useful statement. Almost every controller probably has
other required properties.
Yep, will get rid of this in next patch.
+
+Child nodes:
+Every SLIMbus controller node can contain zero or more child nodes
+representing slave devices on the bus. Every SLIMbus slave device is
+uniquely determined by the enumeration address containing 4 fields:
+Manufacturer ID, Product code, Device index, and Instance value for
+the device.
+If child node is not present and it is instantiated after device
+discovery (slave device reporting itself present).
+
+In some cases it may be necessary to describe non-probeable device
+details such as non-standard ways of powering up a device. In
+such cases, child nodes for those devices will be present as
+slaves of the slimbus-controller, as detailed below.
+
+Required property for SLIMbus child node if it is present:
+- reg - Is Duplex (Device index, Instance ID) from Enumeration
+ Address.
+ Device Index Uniquely identifies multiple Devices within
+ a single Component.
+ Instance ID Is for the cases where multiple Devices of the
+ same type or Class are attached to the bus.
+
+- compatible -"slimMID,PID". The textual representation of Manufacturer ID,
+ Product Code, shall be in lower case hexadecimal with leading
+ zeroes suppressed
+
+SLIMbus example for Qualcomm's slimbus manager component:
+
+ slim@28080000 {
+ compatible = "qcom,slim-msm";
+ reg = <0x28080000 0x2000>,
+ interrupts = <0 33 0>;
+ clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
+ clock-names = "iface_clk", "core_clk";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ codec: wcd9310@1{
Is '1' by itself unique enough because you have 2 address cells. The
unit-address is typically split up into fields with commas unless it's
just a memory address. Anyway, you need to define the unit address
format in this doc.
Yep, this examples should be fixed with proper unit address which is
formed by "device-id,instance-id"
device id + Instance ID makes it unique, I though I already added
details the reg property.
+ compatible = "slim217,60"";
+ reg = <1 0>;
+ };
+ };
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
