Hi,
On Fri, Oct 06, 2017 at 05:51:35PM +0200, srinivas.kandagatla@xxxxxxxxxx wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
>
> This patch adds support to read/write slimbus value elements.
> Currently it only supports byte read/write. Adding this support in
> regmap would give codec drivers more flexibility when there are more
> than 2 control interfaces like slimbus, i2c.
>
> Without this patch each codec driver has to directly call slimbus value
> element apis, and this could would get messy once we want to add i2c
> interface to it.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
[...]
> +static int regmap_slimbus_byte_reg_read(void *context, unsigned int reg,
> + unsigned int *val)
> +{
> + struct slim_device *slim = context;
> + struct slim_val_inf msg = {0,};
> +
> + msg.start_offset = reg;
> + msg.num_bytes = 1;
> + msg.rbuf = (void *)val;
> +
> + return slim_request_val_element(slim, &msg);
> +}
This looks like it won't work on big-endian systems. I know big endian
is pretty uncommon in devices that will likely have SLIMBus, but it's
better to be endian-independent.
> +static int regmap_slimbus_byte_reg_write(void *context, unsigned int reg,
> + unsigned int val)
> +{
> + struct slim_device *slim = context;
> + struct slim_val_inf msg = {0,};
> +
> + msg.start_offset = reg;
> + msg.num_bytes = 1;
> + msg.wbuf = (void *)&val;
> +
> + return slim_change_val_element(slim, &msg);
> +}
dito
> +static struct regmap_bus regmap_slimbus_bus = {
> + .reg_write = regmap_slimbus_byte_reg_write,
> + .reg_read = regmap_slimbus_byte_reg_read,
> +};
Thanks,
Jonathan Neuschäfer
Attachment:
signature.asc
Description: PGP signature
