[PATCH 2/4] ARM: qcom_defconfig: Resync with new Kconfig options

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



CONFIG_HWSPINLOCK must be selected explicitly for SMEM and its
dependencies to be enabled.

The update is generated by "make savedefconfig" and as such reflects
changes to the implicit state of other options, as of v4.14-rc1.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 arch/arm/configs/qcom_defconfig | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index 879159e4ab58..82cd86e524a4 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -28,9 +27,7 @@ CONFIG_PCI=y
 CONFIG_PCI_MSI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_SMP=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_PREEMPT=y
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_CLEANCACHE=y
 CONFIG_ARM_APPENDED_DTB=y
@@ -57,14 +54,12 @@ CONFIG_CFG80211=y
 CONFIG_RFKILL=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_QCOM_EBI2=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_CHR_DEV_SCH=y
@@ -103,7 +98,6 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_QUP=y
@@ -123,9 +117,9 @@ CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
 CONFIG_GPIOLIB=y
 CONFIG_DEBUG_GPIO=y
 CONFIG_GPIO_SYSFS=y
-CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
+CONFIG_CHARGER_QCOM_SMBB=y
 CONFIG_THERMAL=y
 CONFIG_QCOM_TSENS=y
 CONFIG_MFD_PM8XXX=y
@@ -163,7 +157,6 @@ CONFIG_USB_GADGET_VBUS_DRAW=500
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_QCOM_DML=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_MSM=y
@@ -173,7 +166,6 @@ CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PM8058=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PM8XXX=y
 CONFIG_DMADEVICES=y
@@ -187,15 +179,16 @@ CONFIG_IPQ_GCC_4019=y
 CONFIG_IPQ_LCC_806X=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_LCC_8960=y
-CONFIG_MDM_GCC_9615=y
 CONFIG_MDM_LCC_9615=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_REMOTEPROC=y
 CONFIG_QCOM_ADSP_PIL=y
 CONFIG_QCOM_Q6V5_PIL=y
 CONFIG_QCOM_WCNSS_PIL=y
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_PM=y
 CONFIG_QCOM_SMEM=y
@@ -213,7 +206,6 @@ CONFIG_IIO_HRTIMER_TRIGGER=y
 CONFIG_BMP280=y
 CONFIG_PHY_QCOM_APQ8064_SATA=y
 CONFIG_PHY_QCOM_IPQ806X_SATA=y
-CONFIG_NVMEM=y
 CONFIG_QCOM_QFPROM=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -234,7 +226,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
-- 
2.12.0

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux