Make these const as they are only stored as a reference in the quirks
field of an i2c_adapter structure, which is const.
Done using Coccinelle:
@match disable optional_qualifier@
identifier s;
@@
static struct i2c_adapter_quirks s = {...};
@ref@
position p;
identifier match.s;
@@
s@p
@good1@
identifier y;
position ref.p;
identifier match.s;
@@
struct i2c_adapter y = {...,.quirks=&s@p,...};
@good2@
struct i2c_adapter y;
identifier match.s;
position ref.p;
@@
y.quirks = &s@p
@bad depends on !good1 && !good2@
position ref.p;
identifier match.s;
@@
s@p
@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct i2c_adapter_quirks s;
Signed-off-by: Bhumika Goyal <bhumirks@xxxxxxxxx>
---
drivers/i2c/busses/i2c-at91.c | 2 +-
drivers/i2c/busses/i2c-cpm.c | 2 +-
drivers/i2c/busses/i2c-mlxcpld.c | 2 +-
drivers/i2c/busses/i2c-opal.c | 2 +-
drivers/i2c/busses/i2c-powermac.c | 2 +-
drivers/i2c/busses/i2c-qup.c | 2 +-
drivers/i2c/busses/i2c-tegra.c | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 38dd61d..bfd1fdf 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -809,7 +809,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
* The hardware can handle at most two messages concatenated by a
* repeated start via it's internal address feature.
*/
-static struct i2c_adapter_quirks at91_twi_quirks = {
+static const struct i2c_adapter_quirks at91_twi_quirks = {
.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
.max_comb_1st_msg_len = 3,
};
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index d89bde2..8a8ca94 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -413,7 +413,7 @@ static u32 cpm_i2c_func(struct i2c_adapter *adap)
};
/* CPM_MAX_READ is also limiting writes according to the code! */
-static struct i2c_adapter_quirks cpm_i2c_quirks = {
+static const struct i2c_adapter_quirks cpm_i2c_quirks = {
.max_num_msgs = CPM_MAXBD,
.max_read_len = CPM_MAX_READ,
.max_write_len = CPM_MAX_READ,
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index d271e6a..4c28fa2 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -433,7 +433,7 @@ static u32 mlxcpld_i2c_func(struct i2c_adapter *adap)
.functionality = mlxcpld_i2c_func
};
-static struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
+static const struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
.max_read_len = MLXCPLD_I2C_DATA_REG_SZ - MLXCPLD_I2C_MAX_ADDR_LEN,
.max_write_len = MLXCPLD_I2C_DATA_REG_SZ,
diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
index 11e2a1f..0aabb7e 100644
--- a/drivers/i2c/busses/i2c-opal.c
+++ b/drivers/i2c/busses/i2c-opal.c
@@ -204,7 +204,7 @@ static u32 i2c_opal_func(struct i2c_adapter *adapter)
* For two messages, we basically support simple smbus transactions of a
* write-then-anything.
*/
-static struct i2c_adapter_quirks i2c_opal_quirks = {
+static const struct i2c_adapter_quirks i2c_opal_quirks = {
.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
.max_comb_1st_msg_len = 4,
};
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index ef9c858..f2a2067 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -197,7 +197,7 @@ static u32 i2c_powermac_func(struct i2c_adapter * adapter)
.functionality = i2c_powermac_func,
};
-static struct i2c_adapter_quirks i2c_powermac_quirks = {
+static const struct i2c_adapter_quirks i2c_powermac_quirks = {
.max_num_msgs = 1,
};
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 1902d8a..08f8e01 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -1396,7 +1396,7 @@ static u32 qup_i2c_func(struct i2c_adapter *adap)
* the end of the read, the length of the read is specified as one byte
* which limits the possible read to 256 (QUP_READ_LIMIT) bytes.
*/
-static struct i2c_adapter_quirks qup_i2c_quirks = {
+static const struct i2c_adapter_quirks qup_i2c_quirks = {
.max_read_len = QUP_READ_LIMIT,
};
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index a238844..60292d2 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -793,7 +793,7 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
};
/* payload size is only 12 bit */
-static struct i2c_adapter_quirks tegra_i2c_quirks = {
+static const struct i2c_adapter_quirks tegra_i2c_quirks = {
.max_read_len = 4096,
.max_write_len = 4096,
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
