On Wed, Aug 16, 2017 at 05:31:47PM +0300, Stanimir Varbanov wrote: > Hi Rob, Andy, > > On 06/12/2017 03:43 PM, Rob Clark wrote: > > From: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx> > > > > Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx> > > Signed-off-by: Rob Clark <robdclark@xxxxxxxxx> > > --- > > arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 ++++++++++++++++++++++++++++ > > 1 file changed, 28 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi > > index 24c24ab..1dcd632 100644 > > --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi > > +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi > > @@ -88,6 +88,13 @@ > > no-map; > > }; > > > > + venus_mem: venus@89900000 { > > + compatible = "shared-dma-pool"; > > + reg = <0x0 0x89900000 0x0 0x800000>; > > + alignment = <0x1000>; > > + no-map; > > + }; > > In the spirit of 377a22d3caec3d2cda0cc996101121145ac43ff2 "media: venus: > don't abuse dma_alloc for non-DMA allocations" commit the above > venus_mem should be changed to: > > venus_mem: venus@89900000 { > reg = <0x0 0x89900000 0x0 0x600000>; > no-map; > }; > Ok, I'll fix this up. No need to send any update. > > + > > mba_mem: mba@8ea00000 { > > no-map; > > reg = <0 0x8ea00000 0 0x100000>; > > @@ -1214,6 +1221,27 @@ > > }; > > }; > > }; > > + > > + venus: video-codec@1d00000 { > > + compatible = "qcom,msm8916-venus"; > > + reg = <0x01d00000 0xff000>; > > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > > + power-domains = <&gcc VENUS_GDSC>; > > + clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>, > > + <&gcc GCC_VENUS0_AHB_CLK>, > > + <&gcc GCC_VENUS0_AXI_CLK>; > > + clock-names = "core", "iface", "bus"; > > + memory-region = <&venus_mem>; > > + status = "okay"; > > Is that correct, shouldn't the status be disabled and enabled in the > board dts(i) files? There isn't anything board specific for this, so it should be enabled by default. > > + > > + video-decoder { > > + compatible = "venus-decoder"; > > + }; > > + > > + video-encoder { > > + compatible = "venus-encoder"; > > + }; > > + }; > > }; > > > > smd { > > Regards, Andy -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html