Hi Todor,
It's been a while --- how do you do?
Thanks for the patchset!
On Mon, Jun 19, 2017 at 05:48:24PM +0300, Todor Tomov wrote:
> These files control the CSIPHY modules which are responsible for the physical
> layer of the CSI2 receivers.
>
> Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
> ---
> drivers/media/platform/qcom/camss-8x16/csiphy.c | 686 ++++++++++++++++++++++++
> drivers/media/platform/qcom/camss-8x16/csiphy.h | 77 +++
> 2 files changed, 763 insertions(+)
> create mode 100644 drivers/media/platform/qcom/camss-8x16/csiphy.c
> create mode 100644 drivers/media/platform/qcom/camss-8x16/csiphy.h
>
> diff --git a/drivers/media/platform/qcom/camss-8x16/csiphy.c b/drivers/media/platform/qcom/camss-8x16/csiphy.c
> new file mode 100644
> index 0000000..b9d47ca
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss-8x16/csiphy.c
> @@ -0,0 +1,686 @@
> +/*
> + * csiphy.c
> + *
> + * Qualcomm MSM Camera Subsystem - CSIPHY Module
> + *
> + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
How about 2017?
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-subdev.h>
> +
...
> +/*
> + * csiphy_init_formats - Initialize formats on all pads
> + * @sd: CSIPHY V4L2 subdevice
> + * @fh: V4L2 subdev file handle
> + *
> + * Initialize all pad formats with default values.
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int csiphy_init_formats(struct v4l2_subdev *sd,
> + struct v4l2_subdev_fh *fh)
> +{
> + struct v4l2_subdev_format format;
You can do:
struct v4l2_subdev_format format = { 0 };
And drop the memset. Or even better, assign the fields in declaration.
> +
> + memset(&format, 0, sizeof(format));
> + format.pad = MSM_CSIPHY_PAD_SINK;
> + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> + format.format.code = MEDIA_BUS_FMT_UYVY8_2X8;
> + format.format.width = 1920;
> + format.format.height = 1080;
> +
> + return csiphy_set_format(sd, fh ? fh->pad : NULL, &format);
> +}
> +
> +/*
> + * msm_csiphy_subdev_init - Initialize CSIPHY device structure and resources
> + * @csiphy: CSIPHY device
> + * @res: CSIPHY module resources table
> + * @id: CSIPHY module id
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
> + struct resources *res, u8 id)
> +{
> + struct device *dev = to_device_index(csiphy, id);
> + struct platform_device *pdev = container_of(dev,
> + struct platform_device, dev);
to_platform_device()?
> + struct resource *r;
> + int i;
> + int ret;
> +
> + csiphy->id = id;
> + csiphy->cfg.combo_mode = 0;
> +
> + /* Memory */
> +
> + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[0]);
> + csiphy->base = devm_ioremap_resource(dev, r);
> + if (IS_ERR(csiphy->base)) {
> + dev_err(dev, "could not map memory\n");
> + return PTR_ERR(csiphy->base);
> + }
> +
> + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res->reg[1]);
> + csiphy->base_clk_mux = devm_ioremap_resource(dev, r);
> + if (IS_ERR(csiphy->base_clk_mux)) {
> + dev_err(dev, "could not map memory\n");
> + return PTR_ERR(csiphy->base_clk_mux);
> + }
> +
> + /* Interrupt */
> +
> + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
> + res->interrupt[0]);
> + if (!r) {
> + dev_err(dev, "missing IRQ\n");
> + return -EINVAL;
> + }
> +
> + csiphy->irq = r->start;
> + snprintf(csiphy->irq_name, sizeof(csiphy->irq_name), "%s_%s%d",
> + dev_name(dev), MSM_CSIPHY_NAME, csiphy->id);
> + ret = devm_request_irq(dev, csiphy->irq, csiphy_isr,
> + IRQF_TRIGGER_RISING, csiphy->irq_name, csiphy);
> + if (ret < 0) {
> + dev_err(dev, "request_irq failed\n");
Printing the error code as well might be nice for debugging if ever needed.
> + return ret;
> + }
> +
> + disable_irq(csiphy->irq);
> +
> + /* Clocks */
> +
> + csiphy->nclocks = 0;
> + while (res->clock[csiphy->nclocks])
> + csiphy->nclocks++;
> +
> + csiphy->clock = devm_kzalloc(dev, csiphy->nclocks *
> + sizeof(*csiphy->clock), GFP_KERNEL);
> + if (!csiphy->clock)
> + return -ENOMEM;
> +
> + for (i = 0; i < csiphy->nclocks; i++) {
> + csiphy->clock[i] = devm_clk_get(dev, res->clock[i]);
> + if (IS_ERR(csiphy->clock[i]))
> + return PTR_ERR(csiphy->clock[i]);
> +
> + if (res->clock_rate[i]) {
> + long clk_rate = clk_round_rate(csiphy->clock[i],
> + res->clock_rate[i]);
> + if (clk_rate < 0) {
> + dev_err(to_device_index(csiphy, csiphy->id),
> + "clk round rate failed\n");
> + return -EINVAL;
> + }
> + ret = clk_set_rate(csiphy->clock[i], clk_rate);
> + if (ret < 0) {
> + dev_err(to_device_index(csiphy, csiphy->id),
> + "clk set rate failed\n");
> + return ret;
> + }
> + }
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * csiphy_link_setup - Setup CSIPHY connections
> + * @entity: Pointer to media entity structure
> + * @local: Pointer to local pad
> + * @remote: Pointer to remote pad
> + * @flags: Link flags
> + *
> + * Rreturn 0 on success
> + */
> +static int csiphy_link_setup(struct media_entity *entity,
> + const struct media_pad *local,
> + const struct media_pad *remote, u32 flags)
> +{
> + if ((local->flags & MEDIA_PAD_FL_SOURCE) &&
> + (flags & MEDIA_LNK_FL_ENABLED)) {
> + struct v4l2_subdev *sd;
> + struct csiphy_device *csiphy;
> + struct csid_device *csid;
> +
> + if (media_entity_remote_pad((struct media_pad *)local))
This is ugly.
What do you intend to find with media_entity_remote_pad()? The pad flags
haven't been assigned to the pad yet, so media_entity_remote_pad() could
give you something else than remote.
> + return -EBUSY;
> +
> + sd = container_of(entity, struct v4l2_subdev, entity);
media_entity_to_v4l2_subdev().
> + csiphy = v4l2_get_subdevdata(sd);
> +
> + sd = container_of(remote->entity, struct v4l2_subdev, entity);
Ditto.
> + csid = v4l2_get_subdevdata(sd);
> +
> + csiphy->cfg.csid_id = csid->id;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_core_ops csiphy_core_ops = {
> + .s_power = csiphy_set_power,
> +};
> +
> +static const struct v4l2_subdev_video_ops csiphy_video_ops = {
> + .s_stream = csiphy_set_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops csiphy_pad_ops = {
> + .enum_mbus_code = csiphy_enum_mbus_code,
> + .enum_frame_size = csiphy_enum_frame_size,
> + .get_fmt = csiphy_get_format,
> + .set_fmt = csiphy_set_format,
> +};
> +
> +static const struct v4l2_subdev_ops csiphy_v4l2_ops = {
> + .core = &csiphy_core_ops,
> + .video = &csiphy_video_ops,
> + .pad = &csiphy_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops csiphy_v4l2_internal_ops = {
> + .open = csiphy_init_formats,
> +};
> +
> +static const struct media_entity_operations csiphy_media_ops = {
> + .link_setup = csiphy_link_setup,
> + .link_validate = v4l2_subdev_link_validate,
> +};
> +
> +/*
> + * msm_csiphy_register_entity - Register subdev node for CSIPHY module
> + * @csiphy: CSIPHY device
> + * @v4l2_dev: V4L2 device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +int msm_csiphy_register_entity(struct csiphy_device *csiphy,
> + struct v4l2_device *v4l2_dev)
> +{
> + struct v4l2_subdev *sd = &csiphy->subdev;
> + struct media_pad *pads = csiphy->pads;
> + struct device *dev = to_device_index(csiphy, csiphy->id);
> + int ret;
> +
> + v4l2_subdev_init(sd, &csiphy_v4l2_ops);
> + sd->internal_ops = &csiphy_v4l2_internal_ops;
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + snprintf(sd->name, ARRAY_SIZE(sd->name), "%s%d",
> + MSM_CSIPHY_NAME, csiphy->id);
> + v4l2_set_subdevdata(sd, csiphy);
> +
> + ret = csiphy_init_formats(sd, NULL);
> + if (ret < 0) {
> + dev_err(dev, "Failed to init format\n");
> + return ret;
> + }
> +
> + pads[MSM_CSIPHY_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
> + pads[MSM_CSIPHY_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
> +
> + sd->entity.function = MEDIA_ENT_F_IO_V4L;
> + sd->entity.ops = &csiphy_media_ops;
> + ret = media_entity_pads_init(&sd->entity, MSM_CSIPHY_PADS_NUM, pads);
> + if (ret < 0) {
> + dev_err(dev, "Failed to init media entity\n");
> + return ret;
> + }
> +
> + ret = v4l2_device_register_subdev(v4l2_dev, sd);
> + if (ret < 0) {
> + dev_err(dev, "Failed to register subdev\n");
> + media_entity_cleanup(&sd->entity);
> + }
> +
> + return ret;
> +}
> +
> +/*
> + * msm_csiphy_unregister_entity - Unregister CSIPHY module subdev node
> + * @csiphy: CSIPHY device
> + */
> +void msm_csiphy_unregister_entity(struct csiphy_device *csiphy)
> +{
> + v4l2_device_unregister_subdev(&csiphy->subdev);
> +}
> diff --git a/drivers/media/platform/qcom/camss-8x16/csiphy.h b/drivers/media/platform/qcom/camss-8x16/csiphy.h
> new file mode 100644
> index 0000000..60330a8
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss-8x16/csiphy.h
> @@ -0,0 +1,77 @@
> +/*
> + * csiphy.h
> + *
> + * Qualcomm MSM Camera Subsystem - CSIPHY Module
> + *
> + * Copyright (c) 2011-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#ifndef QC_MSM_CAMSS_CSIPHY_H
> +#define QC_MSM_CAMSS_CSIPHY_H
> +
> +#include <linux/clk.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-mediabus.h>
> +#include <media/v4l2-subdev.h>
> +
> +#define MSM_CSIPHY_PAD_SINK 0
> +#define MSM_CSIPHY_PAD_SRC 1
> +#define MSM_CSIPHY_PADS_NUM 2
> +
> +struct csiphy_lane {
> + u8 pos;
> + u8 pol;
> +};
> +
> +struct csiphy_lanes_cfg {
> + int num_data;
> + struct csiphy_lane *data;
> + struct csiphy_lane clk;
> +};
> +
> +struct csiphy_csi2_cfg {
> + int settle_cnt;
> + struct csiphy_lanes_cfg lane_cfg;
> +};
> +
> +struct csiphy_config {
> + u8 combo_mode;
> + u8 csid_id;
> + struct csiphy_csi2_cfg *csi2;
> +};
> +
> +struct csiphy_device {
> + u8 id;
> + struct v4l2_subdev subdev;
> + struct media_pad pads[MSM_CSIPHY_PADS_NUM];
> + void __iomem *base;
> + void __iomem *base_clk_mux;
> + u32 irq;
> + char irq_name[30];
> + struct clk **clock;
You could add a forward declaration and avoid including the header file for
struct clk. Up to you I guess --- for a driver specific header it doesn't
really matter much.
> + int nclocks;
> + struct csiphy_config cfg;
> + struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM];
> +};
> +
> +struct resources;
> +
> +int msm_csiphy_subdev_init(struct csiphy_device *csiphy,
> + struct resources *res, u8 id);
> +
> +int msm_csiphy_register_entity(struct csiphy_device *csiphy,
> + struct v4l2_device *v4l2_dev);
> +
> +void msm_csiphy_unregister_entity(struct csiphy_device *csiphy);
> +
> +#endif /* QC_MSM_CAMSS_CSIPHY_H */
--
Kind regards,
Sakari Ailus
e-mail: sakari.ailus@xxxxxx XMPP: sailus@xxxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
