On Fri, Jun 23, 2017 at 07:15:31PM +0300, Georgi Djakov wrote:
> The CPUs on Qualcomm MSM8916-based platforms are clocked by two PLLs,
> a primary (A53) CPU PLL and a secondary fixed-rate GPLL0. These sources
> are connected to a mux and half-integer divider, which is feeding the
> CPU cores.
>
> This patch adds support for the primary CPU PLL which generates the
> higher range of frequencies above 1GHz.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
> ---
> .../devicetree/bindings/clock/qcom,a53pll.txt | 22 +++++
It's preferred to split bindings to a separate patch. In any case,
Acked-by: Rob Herring <robh@xxxxxxxxxx>
One kconfig comment though:
> drivers/clk/qcom/Kconfig | 9 +++
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/a53-pll.c | 94 ++++++++++++++++++++++
> 4 files changed, 126 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> create mode 100644 drivers/clk/qcom/a53-pll.c
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.txt b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> new file mode 100644
> index 000000000000..f4c2fddf6e7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.txt
> @@ -0,0 +1,22 @@
> +MSM8916 A53 PLL Binding
> +---------------
> +The A53 PLL on MSM8916 platforms is the main CPU PLL used used for frequencies
> +above 1GHz.
> +
> +Required properties :
> +- compatible : Shall contain only one of the following:
> +
> + "qcom,msm8916-a53pll"
> +
> +- reg : shall contain base register location and length
> +
> +- #clock-cells : must be set to <0>
> +
> +Example:
> +
> + a53pll: clock@b016000 {
> + compatible = "qcom,msm8916-a53pll";
> + reg = <0xb016000 0x40>;
> + #clock-cells = <0>;
> + };
> +
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 9f6c278deead..057cf60ed037 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -12,6 +12,15 @@ config COMMON_CLK_QCOM
> select REGMAP_MMIO
> select RESET_CONTROLLER
>
> +config QCOM_A53PLL
> + bool "A53 PLL"
Figuring out config options needed for a specific QC SoC is "fun". If
this is only for MSM8916, then add that to the config option or prompt
text at least.
And please update the arm64 defconfig with this option.
> + depends on COMMON_CLK_QCOM
> + help
> + Support for the A53 PLL on Qualcomm MSM8916 devices. It provides
> + support for CPU frequencies above 1GHz.
> + Say Y if you want to support CPU frequency scaling on devices
> + such as MSM8916.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
