[PATCH v2] firmware: qcom_scm: Fix to allow COMPILE_TEST-ing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Unfortunatly previous attempt to allow consumer drivers to
use COMPILE_TEST option in Kconfig is not enough, because in the
past the consumer drivers used 'depends on' Kconfig option but
now they are using 'select' Kconfig option which means on non ARM
arch'es compilation is triggered. Thus we need to move the ifdefery
one level below by touching the private qcom_scm.h header.

Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
This is second version of the patch with comments addressed:
 * proper identation for static inline functions
 * to avoid duplicating defines group them on top of the header

The first version has been part of the venus driver patchset
v8 and can be found at:
https://patchwork.kernel.org/patch/9704275/

 drivers/firmware/Kconfig    |   2 +-
 drivers/firmware/qcom_scm.h | 122 ++++++++++++++++++++++++++++++++++++--------
 include/linux/qcom_scm.h    |  32 ------------
 3 files changed, 101 insertions(+), 55 deletions(-)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6e4ed5a9c6fd..480578c3691a 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -204,7 +204,7 @@ config FW_CFG_SYSFS_CMDLINE
 
 config QCOM_SCM
 	bool
-	depends on ARM || ARM64
+	depends on ARM || ARM64 || COMPILE_TEST
 	select RESET_CONTROLLER
 
 config QCOM_SCM_32
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 9bea691f30fb..60689fc8a567 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -16,31 +16,20 @@
 #define QCOM_SCM_BOOT_ADDR		0x1
 #define QCOM_SCM_BOOT_ADDR_MC		0x11
 #define QCOM_SCM_SET_REMOTE_STATE	0xa
-extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
 
 #define QCOM_SCM_FLAG_HLOS		0x01
 #define QCOM_SCM_FLAG_COLDBOOT_MC	0x02
 #define QCOM_SCM_FLAG_WARMBOOT_MC	0x04
-extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
-		const cpumask_t *cpus);
-extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
 
 #define QCOM_SCM_CMD_TERMINATE_PC	0x2
 #define QCOM_SCM_FLUSH_FLAG_MASK	0x3
 #define QCOM_SCM_CMD_CORE_HOTPLUGGED	0x10
-extern void __qcom_scm_cpu_power_down(u32 flags);
 
 #define QCOM_SCM_SVC_INFO		0x6
 #define QCOM_IS_CALL_AVAIL_CMD		0x1
-extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
-		u32 cmd_id);
 
 #define QCOM_SCM_SVC_HDCP		0x11
 #define QCOM_SCM_CMD_HDCP		0x01
-extern int __qcom_scm_hdcp_req(struct device *dev,
-		struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
-
-extern void __qcom_scm_init(void);
 
 #define QCOM_SCM_SVC_PIL		0x2
 #define QCOM_SCM_PAS_INIT_IMAGE_CMD	0x1
@@ -49,6 +38,27 @@ extern void __qcom_scm_init(void);
 #define QCOM_SCM_PAS_SHUTDOWN_CMD	0x6
 #define QCOM_SCM_PAS_IS_SUPPORTED_CMD	0x7
 #define QCOM_SCM_PAS_MSS_RESET		0xa
+
+#define QCOM_SCM_SVC_MP			0xc
+#define QCOM_SCM_RESTORE_SEC_CFG	2
+
+#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE	3
+#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT	4
+
+#define QCOM_SCM_SVC_HDCP		0x11
+#define QCOM_SCM_CMD_HDCP		0x01
+
+#if IS_ENABLED(CONFIG_ARM) || IS_ENABLED(CONFIG_ARM64)
+extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
+extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+		const cpumask_t *cpus);
+extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+extern void __qcom_scm_cpu_power_down(u32 flags);
+extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+		u32 cmd_id);
+extern int __qcom_scm_hdcp_req(struct device *dev,
+		struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
+extern void __qcom_scm_init(void);
 extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
 extern int  __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
 		dma_addr_t metadata_phys);
@@ -57,6 +67,85 @@ extern int  __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
 extern int  __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
 extern int  __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
 extern int  __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
+extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+				      u32 spare);
+extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
+					     size_t *size);
+extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
+					     u32 size, u32 spare);
+#else	/* !ARM and !ARM64 */
+static inline int __qcom_scm_set_remote_state(struct device *dev, u32 state,
+					      u32 id)
+{
+	return -ENODEV;
+}
+static inline int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
+						const cpumask_t *cpus)
+{
+	return -ENODEV;
+}
+static inline int __qcom_scm_set_cold_boot_addr(void *entry,
+						const cpumask_t *cpus)
+{
+	return -ENODEV;
+}
+static inline void __qcom_scm_cpu_power_down(u32 flags) {}
+static inline int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
+					       u32 cmd_id)
+{
+	return -ENODEV;
+}
+static inline int __qcom_scm_hdcp_req(struct device *dev,
+				      struct qcom_scm_hdcp_req *req,
+				      u32 req_cnt, u32 *resp)
+{
+	return -ENODEV;
+}
+static inline void __qcom_scm_init(void) {}
+static inline bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
+{
+	return false;
+}
+static inline int  __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
+					     dma_addr_t metadata_phys)
+{
+	return -ENODEV;
+}
+static inline int  __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
+					    phys_addr_t addr, phys_addr_t size)
+{
+	return -ENODEV;
+}
+static inline int  __qcom_scm_pas_auth_and_reset(struct device *dev,
+						 u32 peripheral)
+{
+	return -ENODEV;
+}
+static inline int  __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
+{
+	return -ENODEV;
+}
+static inline int  __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+	return -ENODEV;
+}
+static inline int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
+					     u32 spare)
+{
+	return -ENODEV;
+}
+static inline int __qcom_scm_iommu_secure_ptbl_size(struct device *dev,
+						    u32 spare, size_t *size)
+{
+	return -ENODEV;
+}
+static inline int __qcom_scm_iommu_secure_ptbl_init(struct device *dev,
+						    u64 addr, u32 size,
+						    u32 spare)
+{
+	return -ENODEV;
+}
+#endif
 
 /* common error codes */
 #define QCOM_SCM_V2_EBUSY	-12
@@ -85,15 +174,4 @@ static inline int qcom_scm_remap_error(int err)
 	return -EINVAL;
 }
 
-#define QCOM_SCM_SVC_MP			0xc
-#define QCOM_SCM_RESTORE_SEC_CFG	2
-extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
-				      u32 spare);
-#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE	3
-#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT	4
-extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
-					     size_t *size);
-extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
-					     u32 size, u32 spare);
-
 #endif
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index e5380471c2cd..b628f735f355 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -23,7 +23,6 @@ struct qcom_scm_hdcp_req {
 	u32 val;
 };
 
-#if IS_ENABLED(CONFIG_QCOM_SCM)
 extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
 extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
 extern bool qcom_scm_is_available(void);
@@ -43,35 +42,4 @@ extern int qcom_scm_set_remote_state(u32 state, u32 id);
 extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
 extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
 extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
-#else
-static inline
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
-{
-	return -ENODEV;
-}
-static inline
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
-{
-	return -ENODEV;
-}
-static inline bool qcom_scm_is_available(void) { return false; }
-static inline bool qcom_scm_hdcp_available(void) { return false; }
-static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
-				    u32 *resp) { return -ENODEV; }
-static inline bool qcom_scm_pas_supported(u32 peripheral) { return false; }
-static inline int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
-					  size_t size) { return -ENODEV; }
-static inline int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
-					 phys_addr_t size) { return -ENODEV; }
-static inline int
-qcom_scm_pas_auth_and_reset(u32 peripheral) { return -ENODEV; }
-static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; }
-static inline void qcom_scm_cpu_power_down(u32 flags) {}
-static inline u32 qcom_scm_get_version(void) { return 0; }
-static inline u32
-qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
-static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
-static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
-static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
-#endif
 #endif
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux