Re: [PATCH V1 13/15] spmi: pmic-arb: add support for HW version 5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/30, Kiran Gunda wrote:
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index 412481d..b755c24 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -112,7 +123,8 @@ enum pmic_arb_cmd_op_code {
>  
>  struct apid_data {
>  	u16		ppid;
> -	u8		owner;
> +	u8		write_owner;
> +	u8		irq_owner;

How about irq_ee and write_ee instead?

>  };
>  
>  /**
>  static inline void pmic_arb_base_write(struct spmi_pmic_arb *pa,
> @@ -705,11 +724,18 @@ static int qpnpint_irq_domain_dt_translate(struct irq_domain *d,
>  			(intspec[1] << 8), &apid);
>  	if (rc < 0) {
>  		dev_err(&pa->spmic->dev,
> -		"failed to xlate sid = 0x%x, periph = 0x%x, irq = %x rc = %d\n",
> +		"failed to xlate sid = 0x%x, periph = 0x%x, irq = %u rc = %d\n",

What is this change? Also, use %#x instead of 0x%x and the "
should line up with the ( on the previous line.

>  		intspec[0], intspec[1], intspec[2], rc);
>  		return rc;
>  	}
>  
> +	if (pa->apid_data[apid].irq_owner != pa->ee) {
> +		dev_err(&pa->spmic->dev, "failed to xlate sid = 0x%x, periph = 0x%x, irq = %u: ee=%u but owner=%u\n",
> +			intspec[0], intspec[1], intspec[2], pa->ee,
> +			pa->apid_data[apid].irq_owner);
> +		return -ENODEV;
> +	}
> +
>  	/* Keep track of {max,min}_apid for bounding search during interrupt */
>  	if (apid > pa->max_apid)
>  		pa->max_apid = apid;
> @@ -814,9 +841,11 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pa, u16 ppid)
>  	for (apid = pa->last_apid; apid < pa->max_periph; apid++) {
>  		regval = readl_relaxed(pa->cnfg +
>  				      SPMI_OWNERSHIP_TABLE_REG(apid));
> -		pa->apid_data[apid].owner = SPMI_OWNERSHIP_PERIPH2OWNER(regval);
> +		pa->apid_data[apid].irq_owner
> +			= SPMI_OWNERSHIP_PERIPH2OWNER(regval);
> +		pa->apid_data[apid].write_owner = pa->apid_data[apid].irq_owner;

Please use a local variable pointer *apid.

>  
> -		offset = PMIC_ARB_REG_CHNL(apid);
> +		offset = pa->ver_ops->channel_map_offset(apid);
>  		if (offset >= pa->core_size)
>  			break;
>  
> @@ -854,27 +883,110 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pa, u16 ppid)
>  	return 0;
>  }
>  
> +static int pmic_arb_read_apid_map_v5(struct spmi_pmic_arb *pa)
> +{
> +	u32 regval, offset;
> +	u16 apid, prev_apid, ppid;
> +	bool valid, is_irq_owner;
> +
> +	/*
> +	 * PMIC_ARB_REG_CHNL is a table in HW mapping APID (channel) to PPID.
> +	 * ppid_to_apid is an in-memory invert of that table.  In order to allow
> +	 * multiple EE's to write to a single PPID in arbiter version 5, there

Drop the apostrophe   ^

> +	 * is more than one APID mapped to each PPID.  The owner field for each
> +	 * of these mappings specifies the EE which is allowed to write to the
> +	 * APID.  The owner of the last (highest) APID for a given PPID will
> +	 * receive interrupts from the PPID.
> +	 */
> +	for (apid = 0; apid < pa->max_periph; apid++) {
> +		offset = pa->ver_ops->channel_map_offset(apid);
> +		if (offset >= pa->core_size)
> +			break;
> +
> +		regval = readl_relaxed(pa->core + offset);
> +		if (!regval)
> +			continue;
> +		ppid = (regval >> 8) & PMIC_ARB_PPID_MASK;
> +		is_irq_owner = PMIC_ARB_CHAN_IS_IRQ_OWNER(regval);
> +
> +		regval = readl_relaxed(pa->cnfg +
> +				      SPMI_OWNERSHIP_TABLE_REG(apid));
> +		pa->apid_data[apid].write_owner
> +			= SPMI_OWNERSHIP_PERIPH2OWNER(regval);

Please use a pointer like *apid and *prev where *apid is
incremented during the for-loop. That way we have shorter lines
of code:

		apid->write_owner = SPMI_OWNERSHIP_TABLE_REG(regval);

and

		if (valid && is_irq_owner && prev->write_owner == pa->ee) {

obviously the existing apid will need to be renamed to i, but
that's ok because it's a counter.

> +
> +		pa->apid_data[apid].irq_owner = is_irq_owner ?
> +			pa->apid_data[apid].write_owner : INVALID_EE;
> +
> +		valid = pa->ppid_to_apid[ppid] & PMIC_ARB_CHAN_VALID;
> +		prev_apid = pa->ppid_to_apid[ppid] & ~PMIC_ARB_CHAN_VALID;
> +
> +		if (valid && is_irq_owner &&
> +		    pa->apid_data[prev_apid].write_owner == pa->ee) {
> +			/*
> +			 * Duplicate PPID mapping after the one for this EE;
> +			 * override the irq owner
> +			 */
> +			pa->apid_data[prev_apid].irq_owner
> +				= pa->apid_data[apid].irq_owner;
> +		} else if (!valid || is_irq_owner) {
> +			/* First PPID mapping or duplicate for another EE */
> +			pa->ppid_to_apid[ppid] = apid | PMIC_ARB_CHAN_VALID;
> +		}
> +
> +		pa->apid_data[apid].ppid = ppid;
> +		pa->last_apid = apid;
> +	}
> +
> +	/* Dump the mapping table for debug purposes. */
> +	dev_dbg(&pa->spmic->dev, "PPID APID Write-EE IRQ-EE\n");
> +	for (ppid = 0; ppid < PMIC_ARB_MAX_PPID; ppid++) {
> +		valid = pa->ppid_to_apid[ppid] & PMIC_ARB_CHAN_VALID;
> +		apid = pa->ppid_to_apid[ppid] & ~PMIC_ARB_CHAN_VALID;
> +
> +		if (valid)
> +			dev_dbg(&pa->spmic->dev, "0x%03X %3u %2u %2u\n",

Same %#x story here.

> +				ppid, apid, pa->apid_data[apid].write_owner,
> +				pa->apid_data[apid].irq_owner);
> +	}
> +
> +	return 0;
> +}
> +
>  
> @@ -887,6 +999,27 @@ static u16 pmic_arb_find_apid(struct spmi_pmic_arb *pa, u16 ppid)
>  	return 0;
>  }
>  
> +/*
> + * v5 offset per ee and per apid for observer channels and per apid for
> + * read/write channels.
> + */
> +static int
> +pmic_arb_offset_v5(struct spmi_pmic_arb *pa, u8 sid, u16 addr,
> +		   enum pmic_arb_channel ch_type, u32 *offset)
> +{
> +	u16 apid;
> +	int rc;
> +
> +	rc = pmic_arb_ppid_to_apid_v5(pa, sid, addr, &apid);
> +	if (rc < 0)
> +		return rc;
> +
> +	*offset = (ch_type == PMIC_ARB_CHANNEL_OBS)
> +			? 0x10000 * pa->ee + 0x80 * apid
> +			: 0x10000 * apid;

Please use a switch statement to handle the enum here. That way
we can get compiler checking to make sure all enumerations are
handled.

> +	return 0;
> +}
> +
>  static u32 pmic_arb_fmt_cmd_v1(u8 opc, u8 sid, u16 addr, u8 bc)
>  {
>  	return (opc << 27) | ((sid & 0xf) << 20) | (addr << 4) | (bc & 0x7);
> @@ -1033,11 +1213,14 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
>  
>  		if (hw_ver < PMIC_ARB_VERSION_V3_MIN)
>  			pa->ver_ops = &pmic_arb_v2;
> -		else
> +		else if (hw_ver < PMIC_ARB_VERSION_V5_MIN)
>  			pa->ver_ops = &pmic_arb_v3;
> +		else
> +			pa->ver_ops = &pmic_arb_v5;
>  
> -		/* the apid to ppid table starts at PMIC_ARB_REG_CHNL(0) */
> -		pa->max_periph = (pa->core_size - PMIC_ARB_REG_CHNL(0)) / 4;
> +		/* the apid to ppid table starts at PMIC_ARB_REG_CHNL0 */
> +		pa->max_periph
> +		     = (pa->core_size - pa->ver_ops->channel_map_offset(0)) / 4;

This is really ugly. Please grow a local variable so we can keep
things on one line.

>  
>  		res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>  						   "obsrvr");
> @@ -1074,6 +1257,14 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
>  		err = PTR_ERR(pa->intr);
>  		goto err_put_ctrl;
>  	}
> +	pa->acc_status = pa->intr;
> +
> +	/*
> +	 * PMIC arbiter v5 groups the IRQ control registers in the same hardware
> +	 * module as the read/write channels.
> +	 */
> +	if (hw_ver >= PMIC_ARB_VERSION_V5_MIN)
> +		pa->intr = pa->wr_base;

There's some weird things going on here. How about we make the
version ops return an __iomem pointer to the address instead of
an offset? That way we don't need to care what pa->intr is or add
pa->acc_status? That could be a patch early in the series that
adjusts the ops to return an iomem pointer, and perhaps also
update the 'n' variable to be 16 instead of 8 bits. We can also
express errors through iomem pointers with IS_ERR() checks, so it
nicely removes the need to retrieve offsets through references
sometimes too.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux