Re: [PATCH V1 02/15] spmi: pmic-arb: rename spmi_pmic_arb_dev to spmi_pmic_arb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/30, Kiran Gunda wrote:
> From: Abhijeet Dharmapurikar <adharmap@xxxxxxxxxxxxxx>
> 
> Usually *_dev best used for structures that embed a struct device in
> them. spmi_pmic_arb_dev doesn't embed one. It is simply a driver data
> structure. Use an appropriate name for it.
> 
> Also there are many places in the driver that left shift the bit to
> generate a bit mask. Replace it with the BIT() macro.

That would be a different patch because the subject doesn't even
mention this.

> 
> Signed-off-by: Abhijeet Dharmapurikar <adharmap@xxxxxxxxxxxxxx>
> Signed-off-by: Kiran Gunda <kgunda@xxxxxxxxxxxxxx>
> ---
>  drivers/spmi/spmi-pmic-arb.c | 164 +++++++++++++++++++++----------------------

Would also be nice if you ran scripts/objdiff on this so we can
be confident the code didn't change.

>  1 file changed, 82 insertions(+), 82 deletions(-)
> 
> diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
> index df463d4..7f918ea 100644
> --- a/drivers/spmi/spmi-pmic-arb.c
> +++ b/drivers/spmi/spmi-pmic-arb.c
> @@ -58,10 +58,10 @@
>  
>  /* Channel Status fields */
>  enum pmic_arb_chnl_status {
> -	PMIC_ARB_STATUS_DONE	= (1 << 0),
> -	PMIC_ARB_STATUS_FAILURE	= (1 << 1),
> -	PMIC_ARB_STATUS_DENIED	= (1 << 2),
> -	PMIC_ARB_STATUS_DROPPED	= (1 << 3),
> +	PMIC_ARB_STATUS_DONE	= BIT(0),
> +	PMIC_ARB_STATUS_FAILURE	= BIT(1),
> +	PMIC_ARB_STATUS_DENIED	= BIT(2),
> +	PMIC_ARB_STATUS_DROPPED	= BIT(3),
>  };
>  
>  /* Command register fields */
> @@ -99,7 +99,7 @@ enum pmic_arb_cmd_op_code {
>  struct pmic_arb_ver_ops;
>  
>  /**
> - * spmi_pmic_arb_dev - SPMI PMIC Arbiter object
> + * spmi_pmic_arb - SPMI PMIC Arbiter object
>   *
>   * @rd_base:		on v1 "core", on v2 "observer" register base off DT.
>   * @wr_base:		on v1 "core", on v2 "chnls"    register base off DT.
> @@ -120,7 +120,7 @@ enum pmic_arb_cmd_op_code {
>   * @ppid_to_chan	in-memory copy of PPID -> channel (APID) mapping table.
>   *			v2 only.
>   */
> -struct spmi_pmic_arb_dev {
> +struct spmi_pmic_arb {
>  	void __iomem		*rd_base;
>  	void __iomem		*wr_base;
>  	void __iomem		*intr;
> @@ -164,10 +164,10 @@ struct spmi_pmic_arb_dev {
>   *			on v2 offset of SPMI_PIC_IRQ_CLEARn.
>   */
>  struct pmic_arb_ver_ops {
> -	int (*mode)(struct spmi_pmic_arb_dev *dev, u8 sid, u16 addr,
> +	int (*mode)(struct spmi_pmic_arb *dev, u8 sid, u16 addr,

But we leave dev here? I'm losing faith that this patch is
worthwhile.

>  			mode_t *mode);
>  	/* spmi commands (read_cmd, write_cmd, cmd) functionality */
> -	int (*offset)(struct spmi_pmic_arb_dev *dev, u8 sid, u16 addr,
> +	int (*offset)(struct spmi_pmic_arb *dev, u8 sid, u16 addr,
>  		      u32 *offset);
>  	u32 (*fmt_cmd)(u8 opc, u8 sid, u16 addr, u8 bc);
>  	int (*non_data_cmd)(struct spmi_controller *ctrl, u8 opc, u8 sid);
> @@ -178,16 +178,16 @@ struct pmic_arb_ver_ops {
>  	u32 (*irq_clear)(u8 n);
>  };
>  
> -static inline void pmic_arb_base_write(struct spmi_pmic_arb_dev *dev,
> +static inline void pmic_arb_base_write(struct spmi_pmic_arb *pa,
>  				       u32 offset, u32 val)
>  {
> -	writel_relaxed(val, dev->wr_base + offset);
> +	writel_relaxed(val, pa->wr_base + offset);

"pa" is a little confusing with things like physical address and
such. I would have gone for "arb", but the code is written
already, so why change it now?

>  }
>  
> -static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb_dev *dev,
> +static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb *pa,
>  				       u32 offset, u32 val)
>  {
> -	writel_relaxed(val, dev->rd_base + offset);
> +	writel_relaxed(val, pa->rd_base + offset);
>  }
>  
>  /**
> @@ -196,9 +196,10 @@ static inline void pmic_arb_set_rd_cmd(struct spmi_pmic_arb_dev *dev,
>   * @reg:	register's address
>   * @buf:	output parameter, length must be bc + 1
>   */
> -static void pa_read_data(struct spmi_pmic_arb_dev *dev, u8 *buf, u32 reg, u8 bc)
> +static void pa_read_data(struct spmi_pmic_arb *pa, u8 *buf, u32 reg, u8 bc)

In fact, I would rename these pa_{read,write}_data() functions as
pmic_arb_{read,write}_data() to be consistent. These are the only
places "pa_" is used right now.

>  {
> -	u32 data = __raw_readl(dev->rd_base + reg);
> +	u32 data = __raw_readl(pa->rd_base + reg);
> +
>  	memcpy(buf, &data, (bc & 3) + 1);
>  }
>  
> @@ -209,23 +210,24 @@ static void pa_read_data(struct spmi_pmic_arb_dev *dev, u8 *buf, u32 reg, u8 bc)
>   * @buf:	buffer to write. length must be bc + 1.
>   */
>  static void
> -pa_write_data(struct spmi_pmic_arb_dev *dev, const u8 *buf, u32 reg, u8 bc)
> +pa_write_data(struct spmi_pmic_arb *pa, const u8 *buf, u32 reg, u8 bc)
>  {
>  	u32 data = 0;
> +
>  	memcpy(&data, buf, (bc & 3) + 1);
> -	__raw_writel(data, dev->wr_base + reg);
> +	pmic_arb_base_write(pa, reg, data);

This is an unrelated change. Not sure what's going on with this
diff but we most likely want to keep the __raw_writel() here. See
how renames introduce bugs and why we don't value them?

>  }
>  
> @@ -270,22 +272,22 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
>  static int
>  pmic_arb_non_data_cmd_v1(struct spmi_controller *ctrl, u8 opc, u8 sid)
>  {
> -	struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
> +	struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>  	unsigned long flags;
>  	u32 cmd;
>  	int rc;
>  	u32 offset;
>  
> -	rc = pmic_arb->ver_ops->offset(pmic_arb, sid, 0, &offset);
> +	rc = pa->ver_ops->offset(pa, sid, 0, &offset);
>  	if (rc)
>  		return rc;
>  
>  	cmd = ((opc | 0x40) << 27) | ((sid & 0xf) << 20);
>  
> -	raw_spin_lock_irqsave(&pmic_arb->lock, flags);
> -	pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd);
> -	rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, 0);
> -	raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
> +	raw_spin_lock_irqsave(&pa->lock, flags);
> +	pmic_arb_base_write(pa, offset + PMIC_ARB_CMD, cmd);
> +	rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, 0);
> +	raw_spin_unlock_irqrestore(&pa->lock, flags);
>  
>  	return rc;

Yeah pmic_arb sounds fine too. Not sure why we changed anything
in this function.

>  }
> @@ -299,7 +301,7 @@ static int pmic_arb_wait_for_done(struct spmi_controller *ctrl,
>  /* Non-data command */
>  static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
>  {
> -	struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
> +	struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>  
>  	dev_dbg(&ctrl->dev, "cmd op:0x%x sid:%d\n", opc, sid);
>  
> @@ -307,13 +309,13 @@ static int pmic_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
>  	if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
>  		return -EINVAL;
>  
> -	return pmic_arb->ver_ops->non_data_cmd(ctrl, opc, sid);
> +	return pa->ver_ops->non_data_cmd(ctrl, opc, sid);

Same story...

>  }
>  
>  static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
>  			     u16 addr, u8 *buf, size_t len)
>  {
> -	struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
> +	struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>  	unsigned long flags;
>  	u8 bc = len - 1;
>  	u32 cmd;
> @@ -321,16 +323,16 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
>  	u32 offset;
>  	mode_t mode;
>  
> -	rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr, &offset);
> +	rc = pa->ver_ops->offset(pa, sid, addr, &offset);
>  	if (rc)
>  		return rc;
>  
> -	rc = pmic_arb->ver_ops->mode(pmic_arb, sid, addr, &mode);
> +	rc = pa->ver_ops->mode(pa, sid, addr, &mode);
>  	if (rc)
>  		return rc;
>  
>  	if (!(mode & S_IRUSR)) {
> -		dev_err(&pmic_arb->spmic->dev,
> +		dev_err(&pa->spmic->dev,
>  			"error: impermissible read from peripheral sid:%d addr:0x%x\n",
>  			sid, addr);
>  		return -EPERM;
> @@ -353,30 +355,29 @@ static int pmic_arb_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
>  	else
>  		return -EINVAL;
>  
> -	cmd = pmic_arb->ver_ops->fmt_cmd(opc, sid, addr, bc);
> +	cmd = pa->ver_ops->fmt_cmd(opc, sid, addr, bc);
>  
> -	raw_spin_lock_irqsave(&pmic_arb->lock, flags);
> -	pmic_arb_set_rd_cmd(pmic_arb, offset + PMIC_ARB_CMD, cmd);
> -	rc = pmic_arb_wait_for_done(ctrl, pmic_arb->rd_base, sid, addr);
> +	raw_spin_lock_irqsave(&pa->lock, flags);
> +	pmic_arb_set_rd_cmd(pa, offset + PMIC_ARB_CMD, cmd);
> +	rc = pmic_arb_wait_for_done(ctrl, pa->rd_base, sid, addr);
>  	if (rc)
>  		goto done;
>  
> -	pa_read_data(pmic_arb, buf, offset + PMIC_ARB_RDATA0,
> +	pa_read_data(pa, buf, offset + PMIC_ARB_RDATA0,
>  		     min_t(u8, bc, 3));
>  
>  	if (bc > 3)
> -		pa_read_data(pmic_arb, buf + 4,
> -				offset + PMIC_ARB_RDATA1, bc - 4);
> +		pa_read_data(pa, buf + 4, offset + PMIC_ARB_RDATA1, bc - 4);
>  
>  done:
> -	raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
> +	raw_spin_unlock_irqrestore(&pa->lock, flags);
>  	return rc;
>  }
>  
>  static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
>  			      u16 addr, const u8 *buf, size_t len)
>  {
> -	struct spmi_pmic_arb_dev *pmic_arb = spmi_controller_get_drvdata(ctrl);
> +	struct spmi_pmic_arb *pa = spmi_controller_get_drvdata(ctrl);
>  	unsigned long flags;
>  	u8 bc = len - 1;
>  	u32 cmd;
> @@ -384,16 +385,16 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
>  	u32 offset;
>  	mode_t mode;
>  
> -	rc = pmic_arb->ver_ops->offset(pmic_arb, sid, addr, &offset);
> +	rc = pa->ver_ops->offset(pa, sid, addr, &offset);
>  	if (rc)
>  		return rc;
>  
> -	rc = pmic_arb->ver_ops->mode(pmic_arb, sid, addr, &mode);
> +	rc = pa->ver_ops->mode(pa, sid, addr, &mode);
>  	if (rc)
>  		return rc;
>  
>  	if (!(mode & S_IWUSR)) {
> -		dev_err(&pmic_arb->spmic->dev,
> +		dev_err(&pa->spmic->dev,
>  			"error: impermissible write to peripheral sid:%d addr:0x%x\n",
>  			sid, addr);
>  		return -EPERM;
> @@ -418,20 +419,18 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
>  	else
>  		return -EINVAL;
>  
> -	cmd = pmic_arb->ver_ops->fmt_cmd(opc, sid, addr, bc);
> +	cmd = pa->ver_ops->fmt_cmd(opc, sid, addr, bc);
>  
>  	/* Write data to FIFOs */
> -	raw_spin_lock_irqsave(&pmic_arb->lock, flags);
> -	pa_write_data(pmic_arb, buf, offset + PMIC_ARB_WDATA0,
> -		      min_t(u8, bc, 3));
> +	raw_spin_lock_irqsave(&pa->lock, flags);
> +	pa_write_data(pa, buf, offset + PMIC_ARB_WDATA0, min_t(u8, bc, 3));
>  	if (bc > 3)
> -		pa_write_data(pmic_arb, buf + 4,
> -				offset + PMIC_ARB_WDATA1, bc - 4);
> +		pa_write_data(pa, buf + 4, offset + PMIC_ARB_WDATA1, bc - 4);
>  
>  	/* Start the transaction */
> -	pmic_arb_base_write(pmic_arb, offset + PMIC_ARB_CMD, cmd);
> -	rc = pmic_arb_wait_for_done(ctrl, pmic_arb->wr_base, sid, addr);
> -	raw_spin_unlock_irqrestore(&pmic_arb->lock, flags);
> +	pmic_arb_base_write(pa, offset + PMIC_ARB_CMD, cmd);
> +	rc = pmic_arb_wait_for_done(ctrl, pa->wr_base, sid, addr);
> +	raw_spin_unlock_irqrestore(&pa->lock, flags);
>  
>  	return rc;
>  }

Same story for all this diff.

> @@ -457,7 +456,7 @@ struct spmi_pmic_arb_qpnpint_type {
>  static void qpnpint_spmi_write(struct irq_data *d, u8 reg, void *buf,
>  			       size_t len)
>  {
> -	struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
> +	struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>  	u8 sid = d->hwirq >> 24;
>  	u8 per = d->hwirq >> 16;
>  
> @@ -470,7 +469,7 @@ static void qpnpint_spmi_write(struct irq_data *d, u8 reg, void *buf,
>  
>  static void qpnpint_spmi_read(struct irq_data *d, u8 reg, void *buf, size_t len)
>  {
> -	struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
> +	struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>  	u8 sid = d->hwirq >> 24;
>  	u8 per = d->hwirq >> 16;
>  
> @@ -481,7 +480,7 @@ static void qpnpint_spmi_read(struct irq_data *d, u8 reg, void *buf, size_t len)
>  				    d->irq);
>  }
>  
> -static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid)
> +static void periph_interrupt(struct spmi_pmic_arb *pa, u8 apid)
>  {
>  	unsigned int irq;
>  	u32 status;
> @@ -490,7 +489,7 @@ static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid)
>  	status = readl_relaxed(pa->intr + pa->ver_ops->irq_status(apid));
>  	while (status) {
>  		id = ffs(status) - 1;
> -		status &= ~(1 << id);
> +		status &= ~BIT(id);
>  		irq = irq_find_mapping(pa->domain,
>  				       pa->apid_to_ppid[apid] << 16
>  				     | id << 8
> @@ -501,7 +500,7 @@ static void periph_interrupt(struct spmi_pmic_arb_dev *pa, u8 apid)
>  
>  static void pmic_arb_chained_irq(struct irq_desc *desc)
>  {
> -	struct spmi_pmic_arb_dev *pa = irq_desc_get_handler_data(desc);
> +	struct spmi_pmic_arb *pa = irq_desc_get_handler_data(desc);
>  	struct irq_chip *chip = irq_desc_get_chip(desc);
>  	void __iomem *intr = pa->intr;
>  	int first = pa->min_apid >> 5;
> @@ -516,7 +515,7 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
>  				      pa->ver_ops->owner_acc_status(pa->ee, i));
>  		while (status) {
>  			id = ffs(status) - 1;
> -			status &= ~(1 << id);
> +			status &= ~BIT(id);
>  			periph_interrupt(pa, id + i * 32);
>  		}
>  	}
> @@ -526,23 +525,23 @@ static void pmic_arb_chained_irq(struct irq_desc *desc)
>  
>  static void qpnpint_irq_ack(struct irq_data *d)
>  {
> -	struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
> +	struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>  	u8 irq  = d->hwirq >> 8;
>  	u8 apid = d->hwirq;
>  	unsigned long flags;
>  	u8 data;
>  
>  	raw_spin_lock_irqsave(&pa->lock, flags);
> -	writel_relaxed(1 << irq, pa->intr + pa->ver_ops->irq_clear(apid));
> +	writel_relaxed(BIT(irq), pa->intr + pa->ver_ops->irq_clear(apid));
>  	raw_spin_unlock_irqrestore(&pa->lock, flags);
>  
> -	data = 1 << irq;
> +	data = BIT(irq);
>  	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
>  }
>  
>  static void qpnpint_irq_mask(struct irq_data *d)
>  {
> -	struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
> +	struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>  	u8 irq  = d->hwirq >> 8;
>  	u8 apid = d->hwirq;
>  	unsigned long flags;
> @@ -558,13 +557,13 @@ static void qpnpint_irq_mask(struct irq_data *d)
>  	}
>  	raw_spin_unlock_irqrestore(&pa->lock, flags);
>  
> -	data = 1 << irq;
> +	data = BIT(irq);
>  	qpnpint_spmi_write(d, QPNPINT_REG_EN_CLR, &data, 1);
>  }
>  
>  static void qpnpint_irq_unmask(struct irq_data *d)
>  {
> -	struct spmi_pmic_arb_dev *pa = irq_data_get_irq_chip_data(d);
> +	struct spmi_pmic_arb *pa = irq_data_get_irq_chip_data(d);
>  	u8 irq  = d->hwirq >> 8;
>  	u8 apid = d->hwirq;
>  	unsigned long flags;
> @@ -579,7 +578,7 @@ static void qpnpint_irq_unmask(struct irq_data *d)
>  	}
>  	raw_spin_unlock_irqrestore(&pa->lock, flags);
>  
> -	data = 1 << irq;
> +	data = BIT(irq);
>  	qpnpint_spmi_write(d, QPNPINT_REG_EN_SET, &data, 1);
>  }
>  
> @@ -590,7 +589,7 @@ static void qpnpint_irq_enable(struct irq_data *d)
>  
>  	qpnpint_irq_unmask(d);
>  
> -	data = 1 << irq;
> +	data = BIT(irq);
>  	qpnpint_spmi_write(d, QPNPINT_REG_LATCHED_CLR, &data, 1);
>  }
>  
> @@ -598,25 +597,26 @@ static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type)
>  {
>  	struct spmi_pmic_arb_qpnpint_type type;
>  	u8 irq = d->hwirq >> 8;
> +	u8 bit_mask_irq = BIT(irq);

Why the local variable? Just do the ~BIT(irq) thing in place and
let the compiler take care of the hoist?

>  
>  	qpnpint_spmi_read(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
>  
>  	if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
> -		type.type |= 1 << irq;
> +		type.type |= bit_mask_irq;
>  		if (flow_type & IRQF_TRIGGER_RISING)
> -			type.polarity_high |= 1 << irq;
> +			type.polarity_high |= bit_mask_irq;
>  		if (flow_type & IRQF_TRIGGER_FALLING)
> -			type.polarity_low  |= 1 << irq;
> +			type.polarity_low  |= bit_mask_irq;
>  	} else {
>  		if ((flow_type & (IRQF_TRIGGER_HIGH)) &&
>  		    (flow_type & (IRQF_TRIGGER_LOW)))
>  			return -EINVAL;
>  
> -		type.type &= ~(1 << irq); /* level trig */
> +		type.type &= ~bit_mask_irq; /* level trig */
>  		if (flow_type & IRQF_TRIGGER_HIGH)
> -			type.polarity_high |= 1 << irq;
> +			type.polarity_high |= bit_mask_irq;
>  		else
> -			type.polarity_low  |= 1 << irq;
> +			type.polarity_low  |= bit_mask_irq;
>  	}
>  
>  	qpnpint_spmi_write(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type));
> @@ -657,7 +657,7 @@ struct spmi_pmic_arb_irq_spec {

Overall I see little to no value with this patch. I suggest you
drop the rename. The BIT() thing may be ok, but again, not sure
there's any benefit.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux