Re: [PATCH] PCI: qcom: Add support for IPQ4019 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 23.05.2017 23:07, Bjorn Helgaas wrote:
Stanimir?

On Fri, May 05, 2017 at 05:25:24PM +0200, John Crispin wrote:
Add support for the IPQ4019 PCIe controller. IPQ4019 supports Gen
1/2, one lane, one PCIe root complex with support for MSI and legacy
interrupts, and it conforms to PCI Express Base 2.1 specification.

The core init is the sames as for the MSM8996, however the clocks and
reset lines differ.

Signed-off-by: John Crispin <john@xxxxxxxxxxx>
---
 .../devicetree/bindings/pci/qcom,pcie.txt          |  20 +-
 drivers/pci/host/pcie-qcom.c                       | 304 +++++++++++++++++++++

pcie-qcom.c was recently moved to drivers/pci/dwc, but I was able to
apply this by hand pretty easily.  But I would like Stanimir's ack
first.

Bjorn, thanks for the reminder.

Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>

regards,
Stan
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux