Hi Sricharan
On Thursday 18 May 2017 19:08:12 Sricharan R wrote:
> On 5/18/2017 6:00 PM, Laurent Pinchart wrote:
> > On Thursday 18 May 2017 17:26:14 Sricharan R wrote:
> >> On 5/18/2017 4:09 PM, Laurent Pinchart wrote:
> >>> On Thursday 18 May 2017 15:37:09 Sricharan R wrote:
> >>>> While deferring the probe of IOMMU masters,
> >>>> xlate and add_device callback can pass back error values
> >>>> like -ENODEV, which means IOMMU cannot be connected
> >>>> with that master for real reasons. So rather than
> >>>> killing the master's probe for such errors, just
> >>>> ignore the errors and let the master work without
> >>>> an IOMMU.
> >>>
> >>> I don't think this is a good idea. Why should we allow IOMMU drivers to
> >>> return an error if we're always going to ignore the error value ? That
> >>> will lead to drivers implementing slightly different behaviours, which
> >>> will be painful the day we'll need to start acting based on the error
> >>> value.
> >>
> >> The of_iommu_configure interface, before this series, was returning
> >> either correct 'iommu_ops' or NULL. Also there was no return value from
> >> of_dma_configure which calls of_iommu_configure. This means that if we
> >> block only -ENODEV now and let the other errors, the probe of the master
> >> devices can be killed for reasons apart from deferring. This would be a
> >> change in behavior introduced. All of xlate, add_device, of_pci_map_rid
> >> and others can return values apart from -ENODEV. So was thinking that
> >> restoring the old behavior, except for returning EPROBE_DEFER was the
> >> better thing to do ?
> >
> > We went from a situation where of_iommu_configure() could return either
> > valid operations in the case the device was to be handled by the IOMMU or
> > NULL otherwise, to a situation where we needed a third option for probe
> > deferral. The way we've done this, through error pointers, allows lots of
> > other errors to be returned as well from the of_xlate and add_device
> > operations.
>
> right, this was difference in the behavior now.
>
> > There is currently no use for returning error codes other than
> > -EPROBE_DEFFER from of_iommu_configure(), so your proposal is to block
> > errors returned from the of_xlate and add_device operations inside
> > of_iommu_configure(). My point is that, by doing so, we allow IOMMU
> > drivers to return random error codes that are then ignored. I believe
> > this can cause problems in the future when we will need to extend the API
> > and standardize more error codes, as by then IOMMU drivers will return
> > random errors (they actually do so already to some extent).
> >
> > For of_xlate I agree with you to some extent. v4.11 just checked whether
> > of_xlate succeeded or not, and just didn't use the IOMMU in case it
> > failed. The exact error value was ignored, and drivers already return
> > random errors. Going back to the v4.11 behaviour is what we need to do in
> > the short-term, even if I believe we should standardize the error values
> > returned from of_xlate after v4.12.
> >
> > For add_device, however, the situation is a bit different. The add_device
> > operation is called from the IOMMU bus notifier, and the -ENODEV error is
> > ignored by add_iommu_group(). Any other error will cause bus_set_iommu()
> > to fail, which makes IOMMU probing fail for the drivers that check the
> > return value of bus_set_iommu() (some of them don't :-/).
> >
> > Fixing all this properly requires standardizing the error codes, and going
> > through the existing IOMMU drivers to comply with the standardized
> > behaviour.
>
> I understand your concern on standardizing the error codes from xlate,
> add_device, others and handling them properly. As you said there are quite
> some errors returned from them today. Also another thing is standardizing
> the behavior of of_iommu_configure itself. So that API serves to connect a
> device to its correct iommu_ops. When that's not possible, what should be
> the output and how should that be handled by the caller. The current
> behavior is to either 1) connect to correct ops or 2) wait for it or 3)
> progress further with plain/default dma_ops. Anyways as you said
> standardizing the iommu api ops, would make the of_iommu_configure handling
> more specific. Having said that i think similar fix needs to be done for
> acpi's iort_iommu_configure as well.
I'm less knowledgeable about ACPI but I think you're right. Would you like to
tackle this for v4.13 ? :-)
> > While this shouldn't be very difficult, it's likely not material for a
> > v4.12- rc fix. We will thus likely need to merge this patch (or something
> > very similar to it), but I'd really like to see this fixed properly for
> > v4.13.
>
> When you say "merge this patch (or something similar)", is that about
> documenting the error values for of_xlate and add_device that you showed
> down below (or) about the patch in discussion ?
I meant the patch we're discussing, "[PATCH V2 2/3] iommu: of: Ignore all
errors except EPROBE_DEFER". Sorry for the confusion. One more comment about
this below.
> >>> At the very least, if you want to give a specific meaning to -ENODEV,
> >>> you should check for that value specifically and not ignore all errors
> >>> other than -EPROBE_DEFER. You also need to document the meaning of the
> >>> error value. This can be done in the documentation of the of_xlate
> >>> operation in include/linux/iommu.h:
> >>>
> >>> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> >>> index 2cb54adc4a33..6ba553e7384a 100644
> >>> --- a/include/linux/iommu.h
> >>> +++ b/include/linux/iommu.h
> >>> @@ -181,7 +181,6 @@ struct iommu_resv_region {
> >>> * @domain_window_disable: Disable a particular window for a domain
> >>> * @domain_set_windows: Set the number of windows for a domain
> >>> * @domain_get_windows: Return the number of windows for a domain
> >>> - * @of_xlate: add OF master IDs to iommu grouping
> >>> * @pgsize_bitmap: bitmap of all possible supported page sizes
> >>> */
> >>> struct iommu_ops {
> >>> @@ -224,6 +223,11 @@ struct iommu_ops {
> >>> /* Get the number of windows per domain */
> >>> u32 (*domain_get_windows)(struct iommu_domain *domain);
> >>>
> >>> + /**
> >>> + * @of_xlate:
> >>> + *
> >>> + * Add OF master IDs to iommu grouping.
> >>> + */
> >>> int (*of_xlate)(struct device *dev, struct of_phandle_args *args);
> >>>
> >>> unsigned long pgsize_bitmap;
> >>>
> >>> And add documentation for the error codes there.
> >>>
> >>> If you want to ignore some errors returned from the add_device operation
> >>> you should document it similarly, and in particular document which error
> >>> check(s) need to be performed by of_xlate and which are the
> >>> responsibility of add_device.
> >>>
> >>>> Fixes: 7b07cbefb68d ("iommu: of: Handle IOMMU lookup failure with
> >>>> deferred probing or error")
> >>>> Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> >>>> Tested-by: Magnus Damn <magnus.damn@xxxxxxxxx>
> >>>> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> >>>> ---
> >>>> [V2] Corrected spelling/case in commit log
> >>>>
> >>>> drivers/iommu/of_iommu.c | 6 ++++++
> >>>> 1 file changed, 6 insertions(+)
> >>>>
> >>>> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c
> >>>> index e6e9bec..f0d22c0 100644
> >>>> --- a/drivers/iommu/of_iommu.c
> >>>> +++ b/drivers/iommu/of_iommu.c
> >>>> @@ -237,6 +237,12 @@ const struct iommu_ops *of_iommu_configure(struct
> >>>> device *dev,
> >>>> ops = ERR_PTR(err);
> >>>> }
> >>>>
> >>>> + /* Ignore all other errors apart from EPROBE_DEFER */
> >>>> + if (IS_ERR(ops) && (PTR_ERR(ops) != -EPROBE_DEFER)) {
> >>>> + dev_info(dev, "Adding to IOMMU failed: %ld\n",
PTR_ERR(ops));
I would turn this into a dev_dbg(), as at least the -ENODEV error returned
from add_device has a defined meaning (see the comment in add_iommu_group())
and is in my opinion not a condition that should be reported in the kernel log
by default.
> >>>> + ops = NULL;
> >>>> + }
> >>>> +
> >>>> return ops;
> >>>> }
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
