On 04/28/17 11:13, Stanimir Varbanov wrote:
> Unfortunatly previous attempt to allow consumer drivers to
> use COMPILE_TEST option in Kconfig is not enough, because in the
> past the consumer drivers used 'depends on' Kconfig option but
> now they are using 'select' Kconfig option which means on non ARM
> arch'es compilation is triggered. Thus we need to move the ifdefery
> one level below by touching the private qcom_scm.h header.
>
> To: Andy Gross <andy.gross@xxxxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
> ---
> drivers/firmware/Kconfig | 2 +-
> drivers/firmware/qcom_scm.h | 72 ++++++++++++++++++++++++++++++++++++++-------
> include/linux/qcom_scm.h | 32 --------------------
> 3 files changed, 62 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> index 6e4ed5a9c6fd..480578c3691a 100644
> --- a/drivers/firmware/Kconfig
> +++ b/drivers/firmware/Kconfig
> @@ -204,7 +204,7 @@ config FW_CFG_SYSFS_CMDLINE
>
> config QCOM_SCM
> bool
> - depends on ARM || ARM64
> + depends on ARM || ARM64 || COMPILE_TEST
> select RESET_CONTROLLER
>
> config QCOM_SCM_32
> diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
> index 9bea691f30fb..d2b5723afb3f 100644
> --- a/drivers/firmware/qcom_scm.h
> +++ b/drivers/firmware/qcom_scm.h
> @@ -12,6 +12,7 @@
> #ifndef __QCOM_SCM_INT_H
> #define __QCOM_SCM_INT_H
>
> +#if IS_ENABLED(CONFIG_ARM) || IS_ENABLED(CONFIG_ARM64)
This is weird. Shouldn't this be:
#if IS_ENABLED(CONFIG_QCOM_SCM)
If the code in the actual source only works for ARM, then that should be
handled in that source code, and not in this header IMHO.
Regards,
Hans
> #define QCOM_SCM_SVC_BOOT 0x1
> #define QCOM_SCM_BOOT_ADDR 0x1
> #define QCOM_SCM_BOOT_ADDR_MC 0x11
> @@ -58,6 +59,66 @@ extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
> extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
> extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
>
> +#define QCOM_SCM_SVC_MP 0xc
> +#define QCOM_SCM_RESTORE_SEC_CFG 2
> +extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
> + u32 spare);
> +#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE 3
> +#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT 4
> +extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
> + size_t *size);
> +extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
> + u32 size, u32 spare);
> +#else
> +static inline int __qcom_scm_set_remote_state(struct device *dev, u32 state,
> + u32 id)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
> + const cpumask_t *cpus)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_set_cold_boot_addr(void *entry,
> + const cpumask_t *cpus)
> +{ return -ENODEV; }
> +static inline void __qcom_scm_cpu_power_down(u32 flags) {}
> +static inline int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
> + u32 cmd_id)
> +{ return -ENODEV; }
> +#define QCOM_SCM_SVC_HDCP 0x11
> +#define QCOM_SCM_CMD_HDCP 0x01
> +static inline int __qcom_scm_hdcp_req(struct device *dev,
> + struct qcom_scm_hdcp_req *req,
> + u32 req_cnt, u32 *resp)
> +{ return -ENODEV; }
> +static inline void __qcom_scm_init(void) {}
> +#define QCOM_SCM_SVC_PIL 0x2
> +#define QCOM_SCM_PAS_IS_SUPPORTED_CMD 0x7
> +static inline bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
> +{ return false; }
> +static inline int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
> + dma_addr_t metadata_phys)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
> + phys_addr_t addr, phys_addr_t size)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_pas_auth_and_reset(struct device *dev,
> + u32 peripheral)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
> + u32 spare)
> +{ return -ENODEV; }
> +extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
> + size_t *size)
> +{ return -ENODEV; }
> +static inline int __qcom_scm_iommu_secure_ptbl_init(struct device *dev,
> + u64 addr, u32 size,
> + u32 spare)
> +{ return -ENODEV; }
> +#endif
> +
> /* common error codes */
> #define QCOM_SCM_V2_EBUSY -12
> #define QCOM_SCM_ENOMEM -5
> @@ -85,15 +146,4 @@ static inline int qcom_scm_remap_error(int err)
> return -EINVAL;
> }
>
> -#define QCOM_SCM_SVC_MP 0xc
> -#define QCOM_SCM_RESTORE_SEC_CFG 2
> -extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
> - u32 spare);
> -#define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE 3
> -#define QCOM_SCM_IOMMU_SECURE_PTBL_INIT 4
> -extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
> - size_t *size);
> -extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
> - u32 size, u32 spare);
> -
> #endif
> diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
> index e5380471c2cd..b628f735f355 100644
> --- a/include/linux/qcom_scm.h
> +++ b/include/linux/qcom_scm.h
> @@ -23,7 +23,6 @@ struct qcom_scm_hdcp_req {
> u32 val;
> };
>
> -#if IS_ENABLED(CONFIG_QCOM_SCM)
> extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
> extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
> extern bool qcom_scm_is_available(void);
> @@ -43,35 +42,4 @@ extern int qcom_scm_set_remote_state(u32 state, u32 id);
> extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
> extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
> extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
> -#else
> -static inline
> -int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
> -{
> - return -ENODEV;
> -}
> -static inline
> -int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
> -{
> - return -ENODEV;
> -}
> -static inline bool qcom_scm_is_available(void) { return false; }
> -static inline bool qcom_scm_hdcp_available(void) { return false; }
> -static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
> - u32 *resp) { return -ENODEV; }
> -static inline bool qcom_scm_pas_supported(u32 peripheral) { return false; }
> -static inline int qcom_scm_pas_init_image(u32 peripheral, const void *metadata,
> - size_t size) { return -ENODEV; }
> -static inline int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr,
> - phys_addr_t size) { return -ENODEV; }
> -static inline int
> -qcom_scm_pas_auth_and_reset(u32 peripheral) { return -ENODEV; }
> -static inline int qcom_scm_pas_shutdown(u32 peripheral) { return -ENODEV; }
> -static inline void qcom_scm_cpu_power_down(u32 flags) {}
> -static inline u32 qcom_scm_get_version(void) { return 0; }
> -static inline u32
> -qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
> -static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
> -static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
> -static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
> -#endif
> #endif
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
