On 4/29/2017 12:23 AM, Stephen Boyd wrote:
On 04/28, Varadarajan Narayanan wrote:
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
new file mode 100644
index 0000000..c150bea
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -0,0 +1,48 @@
+/dts-v1/;
+/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include "ipq8074.dtsi"
+
+/ {
+ #address-cells = <0x2>;
+ #size-cells = <0x2>;
+ model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
+ compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
+ interrupt-parent = <&intc>;
+
+ chosen {
+ bootargs = "console=ttyMSM0,115200,n8 root=/dev/ram0 rw init=/init";
Add an aliases node for serial0 and use a chosen node with stdout-path = "serial0" instead please.
Ok
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0x0 0x20000000>;
+ };
+
+ soc: soc {
Do you need the soc label here? Please remove.
Ok
+ pinctrl@1000000 {
+ serial_4_pins: serial4_pinmux {
+ mux {
+ pins = "gpio23", "gpio24";
+ function = "blsp4_uart1";
+ bias-disable;
+ };
+ };
+ };
+
+ serial@78b3000 {
+ pinctrl-0 = <&serial_4_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
new file mode 100644
index 0000000..f910cc0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-ipq8074.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8074";
+ compatible = "qcom,ipq8074";
+
+ soc: soc {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ pinctrl@1000000 {
+ compatible = "qcom,ipq8074-pinctrl";
+ reg = <0x1000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ intc: interrupt-controller@b000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <0x3>;
+ reg = <0xb000000 0x1000>,
+ <0xb002000 0x1000>;
Please align this up with previous reg property.
Ok
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
Is there an mmio timer as well? We should add it too.
Ok
+
+ gcc: gcc@1800000 {
+ compatible = "qcom,gcc-ipq8074";
+ reg = <0x1800000 0x80000>;
Wow that is a huge area! Is it really that large?
Yes, per the memory map this region is 512K.
+ #clock-cells = <0x1>;
+ #reset-cells = <0x1>;
+ };
+
+ serial@78b3000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78b3000 0x200>;
+ interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+ };
+
+ cpus {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ cpu-map {
+
+ cluster0 {
+
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
Is this needed? Looks ok, but just curious if we need to do it
for other arm64 platforms we support.
Don't see the need for topology at this time, will add it later if needed.
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ enable-method = "psci";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <0x2>;
+ };
This should be inside some CPU? CPU0?
There is only one L2. We followed the same convention as in msm8916.dtsi.
+ };
We should be able to add the performance monitor node too?
Ok
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ clocks {
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
Not 32765 or 32768?
It is 32000.
+ #clock-cells = <0>;
+ };
+
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <19200000>;
+ #clock-cells = <0>;
+ };
+ };
-Varada
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum, a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
