Re: [PATCH V8 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Apr 08, 2017 at 12:55:46AM -0400, Sinan Kaya wrote:
> When the operating system is booted with the default ASPM policy
> (POLICY_DEFAULT), current code is querying the enable/disable
> states from ASPM registers to determine the policy.
> 
> For example, a BIOS could set the power saving state to performance
> and clear all ASPM control registers. A balanced ASPM policy could
> enable L0s and disable L1. A power conscious BIOS could enable both
> L0s and L1 to trade off latency and performance vs. power.
> 
> After hotplug removal, pcie_aspm_exit_link_state() function clears
> the ASPM registers. An insertion following hotplug removal reads
> incorrect policy as ASPM disabled even though ASPM was enabled
> during boot.
> 
> This is caused by the fact that same function is used for reconfiguring
> ASPM regardless of the power on state.
> 
> ------------------------
> Changes from v7 (https://www.spinics.net/lists/arm-kernel/msg573034.html)
> ------------------------
> - enable LTSSM as a best effort if the endpoint is not connected during
>   boot
> 
> 
> Sinan Kaya (5):
>   PCI/ASPM: introduce pci_aspm_init() and add to pci_init_capabilities()
>   PCI/ASPM: split pci_aspm_init() into two
>   PCI/ASPM: add init hook to device_add
>   PCI/ASPM: save power on values during bridge init
>   PCI/ASPM: move link_state cleanup to bridge remove
> 
>  drivers/pci/pcie/aspm.c | 149 +++++++++++++++++++++++++++++++++---------------
>  drivers/pci/probe.c     |   3 +
>  drivers/pci/remove.c    |   3 +-
>  include/linux/pci.h     |   2 +
>  4 files changed, 110 insertions(+), 47 deletions(-)

Hi Sinan,

What are these patches based on?  I normally apply things to my "master"
branch, which is typically -rc1 or -rc2.  Right now it's v4.11-rc1, and
these don't apply cleanly:

  04:17:59 ~/linux (master)$ stg branch --create pci/aspm-sk-v8 v4.11-rc1
  Checking for changes in the working directory ... done
  Don't know how to determine parent branch from "v4.11-rc1"
  Branch "pci/aspm-sk-v8" created
  04:18:18 ~/linux (pci/aspm-sk-v8)$ stg import -M --sign m/sk-v8
  Checking for changes in the working directory ... done
  Importing patch "pci-aspm-introduce" ... done
  Importing patch "pci-aspm-split-pci_aspm_init" ... done
  Importing patch "pci-aspm-add-init-hook-to" ... error: patch failed: drivers/pci/pcie/aspm.c:798
  error: drivers/pci/pcie/aspm.c: patch does not apply
  stg import: Diff does not apply cleanly
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux