Re: [PATCH V7 0/5] PCI/ASPM: reconfigure ASPM following hotplug for POLICY_DEFAULT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mayurkumar,

On 3/30/2017 9:30 AM, Sinan Kaya wrote:
> When the operating system is booted with the default ASPM policy
> (POLICY_DEFAULT), current code is querying the enable/disable
> states from ASPM registers to determine the policy.
> 
> For example, a BIOS could set the power saving state to performance
> and clear all ASPM control registers. A balanced ASPM policy could
> enable L0s and disable L1. A power conscious BIOS could enable both
> L0s and L1 to trade off latency and performance vs. power.
> 
> After hotplug removal, pcie_aspm_exit_link_state() function clears
> the ASPM registers. An insertion following hotplug removal reads
> incorrect policy as ASPM disabled even though ASPM was enabled
> during boot.
> 
> This is caused by the fact that same function is used for reconfiguring
> ASPM regardless of the power on state.
> 
> ------------------------
> Changes from v6 (https://www.spinics.net/lists/arm-kernel/msg572876.html)
> ------------------------
> - revert the accidental parent check in bridge remove
> 
> Sinan Kaya (5):
>   PCI/ASPM: introduce pci_aspm_init() and add to pci_init_capabilities()
>   PCI/ASPM: split pci_aspm_init() into two
>   PCI/ASPM: add init hook to device_add
>   PCI/ASPM: save power on values during bridge init
>   PCI/ASPM: move link_state cleanup to bridge remove
> 
>  drivers/pci/pcie/aspm.c | 137 ++++++++++++++++++++++++++++++++----------------
>  drivers/pci/probe.c     |   3 ++
>  drivers/pci/remove.c    |   3 +-
>  include/linux/pci.h     |   2 +
>  4 files changed, 98 insertions(+), 47 deletions(-)
> 

Did you get a chance to test?

Sinan

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux