The debug APB clock is absent in hi6220 driver, so this patch is to add support for it. Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx> --- drivers/clk/hisilicon/clk-hi6220.c | 1 + include/dt-bindings/clock/hi6220-clock.h | 5 ++++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/clk/hisilicon/clk-hi6220.c b/drivers/clk/hisilicon/clk-hi6220.c index c0e8e1f..2ae151c 100644 --- a/drivers/clk/hisilicon/clk-hi6220.c +++ b/drivers/clk/hisilicon/clk-hi6220.c @@ -134,6 +134,7 @@ static struct hisi_gate_clock hi6220_separated_gate_clks_sys[] __initdata = { { HI6220_UART4_PCLK, "uart4_pclk", "uart4_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 8, 0, }, { HI6220_SPI_CLK, "spi_clk", "clk_150m", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 9, 0, }, { HI6220_TSENSOR_CLK, "tsensor_clk", "clk_bus", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x230, 12, 0, }, + { HI6220_DAPB_CLK, "dapb_clk", "cs_dapb", CLK_SET_RATE_PARENT|CLK_IS_CRITICAL, 0x230, 18, 0, }, { HI6220_MMU_CLK, "mmu_clk", "ddrc_axi1", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x240, 11, 0, }, { HI6220_HIFI_SEL, "hifi_sel", "hifi_src", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 0, 0, }, { HI6220_MMC0_SYSPLL, "mmc0_syspll", "syspll", CLK_SET_RATE_PARENT|CLK_IGNORE_UNUSED, 0x270, 1, 0, }, diff --git a/include/dt-bindings/clock/hi6220-clock.h b/include/dt-bindings/clock/hi6220-clock.h index 6b03c84..b8ba665 100644 --- a/include/dt-bindings/clock/hi6220-clock.h +++ b/include/dt-bindings/clock/hi6220-clock.h @@ -124,7 +124,10 @@ #define HI6220_CS_DAPB 57 #define HI6220_CS_ATB_DIV 58 -#define HI6220_SYS_NR_CLKS 59 +/* gate clock */ +#define HI6220_DAPB_CLK 59 + +#define HI6220_SYS_NR_CLKS 60 /* clk in Hi6220 media controller */ /* gate clocks */ -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html