Re: [PATCH V3 3/5] drivers: arm-smmu: Add clock support for QCOM_SMMUV2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 09, 2017 at 09:05:46PM +0530, Sricharan R wrote:
> The QCOM_SMMUV2 is an implementation of the arm,smmu-v2 architecture.
> The qcom,smmu is instantiated for each of the multimedia cores (for eg)
> Venus (video encoder/decoder), mdp (display) etc, and they are connected
> to the Multimedia Aggregator Interconnect (MMAGIC). So the access to
> any of the MMU's registers, as well as MMU's downstream bus access,
> requires the specified MMAGIC clocks to be enabled. So adding a new
> binding for the qcom,smmu-v2 and the required mmagic clock bindings for
> the same. Also adding the support for enabling the qcom,smmu-v2 clocks in
> the driver.
> 
>                -------------  ---------
>                |   VENUS   |  | MDP   |
> 	       |	   |  |       |
> 	       -------------  --------
> 		     |           |
> 		     |           |
>                   ------      ---------
>                   |SMMU |     | SMMU  |
>                   |	|     |       |
>                   ------      --------
> 		    |            |
> 		    |            |
>        -----------------------------------------
>        |	MMAGIC INTERCONNECT (MMSS NOC) |
>        |                                       |
>        -----------------------------------------
>                    |                 |
> 		   |           ----------------------------------
>                  -----         | 	SYSTEM NOC		|
>                  |DDR|	       |				|
>                  -----         ---------------------------------
> 		   |		    |
>                    |               ------
> 		   |<-------------| CPU|
> 				  ------
> 
> Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/iommu/arm,smmu.txt         |   8 ++
>  drivers/iommu/arm-smmu.c                           | 124 +++++++++++++++++++++
>  2 files changed, 132 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> index b369c13..88e02d6 100644
> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt
> @@ -17,6 +17,7 @@ conditions.
>                          "arm,mmu-401"
>                          "arm,mmu-500"
>                          "cavium,smmu-v2"
> +			"qcom,smmu-v2"

I know Cavium did it, but I'd prefer to see SoC specific compatibles 
here.

>  
>                    depending on the particular implementation and/or the
>                    version of the architecture implemented.
> @@ -74,6 +75,13 @@ conditions.
>                    "cfg_clk" is optional if required to access the TCU's programming
>                    interface, apart from the "tcu_clk".
>  
> +		  Should have "mmagic_ahb_clk", "mmagic_cfg_ahb_clk",
> +                              "smmu_core_ahb_clk", "smmu_core_axi_clk",
> +                              "mmagic_core_axi_clk" for "qcom,smmu-v2"

This is instead of the above clocks?

Are these clocks all really part of the SMMU or are the mmagic clocks 
working around no proper driver for the mmagic?

> +
> +		  "mmagic_core_axi_clk" is required for smmu's access to the
> +                   downstream bus and rest for the smmu's register group access.
> +
>  - clocks:         Phandles for respective clocks described by clock-names.
>  
>  - power-domains:  Phandles to SMMU's power domain specifier. This is
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux